Lancia Motor Club Forum Banner
16 October, 2019, 09:06:43 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Brake Drums  (Read 968 times)
0 Members and 1 Guest are viewing this topic.
Kevin MacBride
Lapsed
Megaposter
*
Offline Offline

Posts: 451



« on: 10 September, 2010, 09:40:11 AM »

Anyone got a photo of a 6th series brake drum back backplate. The ones I have seem to have 'plate' welded over what looks like cooling holes. I need to know if its a modification, or original. The plates have large cooling ducts fitted.
Logged

B20 4th series (having a 'facelift')

2000 sedan
Fiat Multipla
Fiat Cinquecento
Sliding Pillar
Permanent resident
**
Offline Offline

Posts: 1527



« Reply #1 on: 10 September, 2010, 02:58:47 PM »

Kevin, I hope this is OK, it's not that good quality and it was just as the brakes were when dismantled, so is not clean!
Ade.


* B20 6th front drum backplate.jpg (247.52 KB, 1364x1023 - viewed 174 times.)
Logged

1955 Aurelia
1961 Lamborghini
Kevin MacBride
Lapsed
Megaposter
*
Offline Offline

Posts: 451



« Reply #2 on: 10 September, 2010, 03:07:23 PM »

Thats a good picture. Mine are the same, except they have 2 extra holes, one is a large slot near the cooling duct,  and the other is a large square. Both have plates welded over them on the outside. The odd thing is that the holes are very neatly cut, as if original, but why they are covered up is a mystery.
I'll put up a picture later.
Logged

B20 4th series (having a 'facelift')

2000 sedan
Fiat Multipla
Fiat Cinquecento
Kevin MacBride
Lapsed
Megaposter
*
Offline Offline

Posts: 451



« Reply #3 on: 12 September, 2010, 11:15:01 PM »

You can see the outlines of the holes. One is a slot on the left side close to the intake duct, the other a triangular shape on the right side. they both have a plate tack welded to the back of the plate. As I need as much cooling as possible, I'm thinking of trying to fit a grille or duct. Any ideas ? Obviously I also need to keep dirt and water from entering.


* 007.JPG (120.88 KB, 640x480 - viewed 151 times.)
Logged

B20 4th series (having a 'facelift')

2000 sedan
Fiat Multipla
Fiat Cinquecento
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines