Lancia Motor Club Forum Banner
06 December, 2019, 12:10:05 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: 1600 valve guides  (Read 592 times)
0 Members and 1 Guest are viewing this topic.
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3613



« on: 04 September, 2010, 06:01:14 PM »

I am in process of sorting a 1600 head out with the ubiquitous thread problems of cam cap retaining bolts, and I have found the valve guides are non standard (apart from one?!). It seems they have a ribbing inside at the top portion (see photo). I have never seen this type before. It was gasflowed and used for racing so are these guides (used for both inlet and exhaust) better for hot racing conditions or what. Needless to say no valve stem seal was present on inlets (I wasnt expecting them on the exhausts), and none could be fitted as there is no shoulder.

Any thoughts?

Tim


* cylinder head 002.jpg (229.86 KB, 2592x1728 - viewed 159 times.)
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines