Lancia Motor Club Forum Banner
09 April, 2020, 11:58:40 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Part numbers for Ducellier ignition bits?  (Read 3797 times)
0 Members and 1 Guest are viewing this topic.
zagatoman
Lapsed
Senior Member
*****
Offline Offline

Posts: 198


Looking a lot better


« on: 26 August, 2010, 10:12:17 AM »

Hi all, just want to pick your brains again.

Can anyone please supply me with part numbers for Ducellier ignition bits for a 1968 Fulvia Zagato 1300cc

Points
Condenser
Rotor arm
Cap.

Alternatively, has anyone got a Marelli distributor for a 1300cc Fulvia Sport Zagato they donít want?


   

Thanks, Paul
Logged

Series 1, 1.3 Fulvia Zagato 1969
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3728



« Reply #1 on: 26 August, 2010, 02:15:35 PM »

You could check for a Luminition convertion....

Tim
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia 1600HF
1972 1600 Fulvia Sport
1979 2500 Gamma Coupe
1988 Delta 1.6GTi
1998 Zeta
zagatoman
Lapsed
Senior Member
*****
Offline Offline

Posts: 198


Looking a lot better


« Reply #2 on: 26 August, 2010, 06:19:28 PM »

Hi Tim,

Funds are short so will have to go with the Marelli distributor if I cant get the Ducellier ignition bits.

Would be nice though.

Paul
Logged

Series 1, 1.3 Fulvia Zagato 1969
nistri
Megaposter
*
Offline Offline

Posts: 271


« Reply #3 on: 27 August, 2010, 06:57:26 AM »

I might have a new Ducellier distributor among my spares. I will check it at the weekend and will let you know if available. Regards, Andrea
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
zagatoman
Lapsed
Senior Member
*****
Offline Offline

Posts: 198


Looking a lot better


« Reply #4 on: 27 August, 2010, 11:54:30 AM »

Hi Andrea,

thanks for the offering to look for the Ducellier distributor, I actually need a Marelli distributor. The problem is I cant find ignition parts for my car with the Ducellier distributor so have decided to fit a Marelli distributor that I can get parts for.

I would still like to use my Ducellier distributor, would you have and ignition parts for this?

Thanks again, Paul
Logged

Series 1, 1.3 Fulvia Zagato 1969
nistri
Megaposter
*
Offline Offline

Posts: 271


« Reply #5 on: 30 August, 2010, 11:00:54 AM »

Hi Paul,
I do have a Ducellier distributor complete but used and in good conditions. I can send you a couple of photos if you give me your e-mail address (they are quite large). The type of Ducellier I have is 4206A. I am not sure what the exact problem with your distributor is (apart from scarcity of spares). Nonetheless, I think that the same distributor was fitted to a range of French cars of the 60s. Have you tried to cross reference it to Renault and Peugeot? From distant memory, I think this one uses a rotor arm which was very similar to the one of my Renault 12.
Marelli distributors: with four Fulvias at home I regrettably cannot risk parting with any.
Best regards, Andrea
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
Nigel Carine
Member
*
Offline Offline

Posts: 8


« Reply #6 on: 31 August, 2010, 03:18:50 PM »

Hello Paul
To take Andrea's idea a bit further< I run an Alpine Renault and have no problems getting bits for the Ducellier. Try a firm called Meca Parts (good website) or GBS (not so good), both Renault dedicated.. You will need the number on the side of the dizzy and they are French so postage will be heavy but worth a try if you're desperate.

Nigel
Logged
lanciab20
President
Member
*****
Offline Offline

Posts: 41


« Reply #7 on: 06 September, 2010, 04:02:25 PM »

Have you tried
http://www.ignitioncarparts.co.uk?
They do some Beta stuff, Dedra, A112, Thema, nothing listed for Fulvia but they might be able to get you a number.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines