Lancia Motor Club Forum Banner
10 December, 2019, 07:23:28 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: 1 [2] 3   Go Down
  Print  
Author Topic: Technical data only  (Read 16331 times)
0 Members and 1 Guest are viewing this topic.
Sebastien
Megaposter
*
Offline Offline

Posts: 464


« Reply #15 on: 07 March, 2013, 10:47:44 AM »

Leather for your Lambda restoration - stamped according to original design
Foglizzo
Lungo Dora Liguria, 58
10143 Torino - Italy
www.foglizzo.com
T: +39 011 5818 728
F: +39 011 4512 109
Logged
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1084



« Reply #16 on: 13 July, 2013, 02:17:17 PM »

Lancia Blue

I have been researching.  Opinion is that Lancia Blue Lechler code is 121.  That is now yellow!  The correct code is 121L and the mix is...

I can confirm that this is a beautiful deep blue corresponding to Lancia Blue 1961 (no earlier reference is available).   


* Lancia Blue.jpg [800x600].jpg (94.78 KB, 725x600 - viewed 335 times.)
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1084



« Reply #17 on: 09 December, 2013, 11:10:29 AM »

Brake and associated mechanisms


* Front brake [1280x768].jpg (97.32 KB, 768x508 - viewed 867 times.)

* Front suspension [1280x768].jpg (47.31 KB, 768x492 - viewed 826 times.)

* Hand brake and gear lever [1280x768].jpg (94.72 KB, 768x519 - viewed 864 times.)

* Pedals [1280x768].jpg (87.26 KB, 768x488 - viewed 900 times.)
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1084



« Reply #18 on: 09 December, 2014, 01:49:38 PM »

Third Gear Replacement

The 6x38mm hardened steel pins (11830) required for locating the gear wheels on the lay-shaft may be obtained from
http://www.boneham.co.uk/
at a cost of 10p each - plus 7.40 vat and postage!     They are actually 6x40mm and described as "Solid Metric Dowel Pins to DIN6325" and are 2mm too long but can be ground down to suit.
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1084



« Reply #19 on: 04 August, 2015, 08:29:58 PM »

Cylinder block repair by cold metal spray, also crank straightening, white metal bearings, all repairs to ordinary Vintage and Classic engines (not Lancia rebores!).  See "fingers (and toes) crossed"
http://www.cylinderheads.co.uk/
Contact Nick Gilfillan, mobile +44 (0) 7768 622448
« Last Edit: 10 August, 2015, 08:18:29 AM by davidwheeler » Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1084



« Reply #20 on: 15 August, 2015, 08:22:25 AM »

Magnesium sacrificial anodes
https://www.limekilnchandlers.co.uk/index.php?search[keywords]=magnesium+anode&_a=category
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1084



« Reply #21 on: 08 April, 2016, 03:58:14 PM »

Lamda head gaskets from Dobson Gaskets (www.dobsongasket.com) 01535 607257
Ring up and talk to David (or, perhaps, Andrew)
The basic gasket is known as "Lambda type 78"  (SV7451)    This is laser cut from the original engineering drawings of the cylinder head and corresponds to the standard VIIth series bore of 77.3mm.  It is made from compressed graphite with a copper fire ring and should fit all VIIth series cars which have not been bored out too much.
If your bore is substantially more than 77.3mm you are into type 79 territory.  Type 79 standard bore is 82.55 but mine is much bigger!   You need to ask to be sent a template which is cut from 3mm pseudo-asbestos and offer it up to the block locating it by the vertical drive tunnel ring and the locating ring at the back of the block.    Carefully cut round the bores with a sharp knife held vertically against the cylinder walls and send it back  identified by the car's registration number.  This will be fed into the laser cutter via the CAD and will then be kept for future reference so if you need more gaskets quote "type 79 reg.  XX1111" and they will know what to do.
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1084



« Reply #22 on: 27 May, 2016, 07:43:19 AM »

Lambda clutch spring data from Tony Stevens   
Spring type    Configuration  Open length mm  Closed length mm   Closed force Kg Compressed length mm
Original          .306"x.161" flat wire       81.5                     40                     82
JGV special     .230 round                   53.5                     40                     84                            30
Consortium     .307"x.192" flat             82.4                     40                      84                               
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1084



« Reply #23 on: 16 June, 2016, 10:56:36 AM »

Le Nivex petrol gauge pump internals.  Should be a cup washer but a simple flat one seems to work for now.


* IMG_0166 (Copy).JPG (121.14 KB, 1024x768 - viewed 184 times.)
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1084



« Reply #24 on: 25 July, 2017, 10:34:36 AM »

Rear springs.    

Jones Springs 0121 5687575  http://www.jones-springs.co.uk/  speak to Kev.    Between us we have worked out the correct configuration of Lambda rear springs based on information ultimately from John Vessey and measurements taken by myself.    I have had the springs back and fitted them and they have settled into exactly the right configuration.   You have to remind them from time to time of course as is par for the course for engineering firms!


* Lambda spring 001 (Copy).jpg (263.25 KB, 765x1050 - viewed 102 times.)
« Last Edit: 16 August, 2017, 04:13:28 PM by davidwheeler » Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1084



« Reply #25 on: 23 August, 2017, 10:04:49 AM »

Works drawings springs

* 11-1641 bladveer achter 7th series.pdf (759.89 KB - downloaded 65 times.)
« Last Edit: 23 August, 2017, 10:08:10 AM by davidwheeler » Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1084



« Reply #26 on: 23 August, 2017, 10:07:50 AM »

Works drawings springs

* C 44-2, sospensione posteriore.pdf (569.71 KB - downloaded 68 times.)
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
GG
Megaposter
*
Offline Offline

Posts: 382


B20 s.2, Appia C10 unrestored


WWW
« Reply #27 on: 23 August, 2017, 03:18:22 PM »

From a Glasurit swatch book, two different formulas for Lancia blu. Maybe this will help someone.... They list the blue from 1966. Don't know if the blue changed over the preceding years.


* Screen Shot 2017-08-23 at 10.14.11 AM.png (214.83 KB, 735x133 - viewed 233 times.)

* Screen Shot 2017-08-23 at 10.15.45 AM.png (537.78 KB, 1799x324 - viewed 117 times.)
Logged

B20 s.2, Appia C10 unrestored
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1084



« Reply #28 on: 03 September, 2017, 09:20:25 AM »

Petrol tank capacity 68litres = 14.95 imperial gallons.
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
Dikappa
Megaposter
*
Offline Offline

Posts: 267


« Reply #29 on: 04 October, 2017, 07:29:56 PM »

Bearing lists, one nice original from RIV

* Lancia LAmbda bearings.pdf (662.06 KB - downloaded 58 times.)
* RIV Lambda bearing list.pdf (110.86 KB - downloaded 71 times.)
Logged
Pages: 1 [2] 3   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines