Lancia Motor Club Forum Banner
17 February, 2020, 07:58:03 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: lancia subfrome mounting bolts  (Read 1207 times)
0 Members and 1 Guest are viewing this topic.
thegadsby
Lapsed
Member
**
Offline Offline

Posts: 15



« on: 31 January, 2010, 09:21:20 AM »

I am currently restoring my Lancia Fulvia series 1 coupe

I would like to replace all of the front subframe mounting bolts, which are a non standard length

Does any one out there have an indea where these could be obtained?

Regards


John


* stripped shell.jpg (45.88 KB, 700x406 - viewed 140 times.)
Logged
angelorange
Megaposter
*
Offline Offline

Posts: 317



WWW
« Reply #1 on: 05 February, 2010, 06:56:16 PM »

Try Pitline Roma or Cavalitto.
Logged

I'm entitled to my ignorance!
thegadsby
Lapsed
Member
**
Offline Offline

Posts: 15



« Reply #2 on: 06 February, 2010, 06:43:35 PM »

grazie

molti ringraziamenti per il quel vederanno se puņ ottenere le punte rquired
Logged
thegadsby
Lapsed
Member
**
Offline Offline

Posts: 15



« Reply #3 on: 08 February, 2010, 06:52:10 PM »

if any one breaking a fulvia some reasonable second hand bolts would be Ok

I have 2 that are badly stripped and dont want to reusue

John
Logged
Neale
Member

Offline Offline

Posts: 4


« Reply #4 on: 08 February, 2010, 07:12:59 PM »

You could try the non standard socket screw company in Birmingham for new bolts, or otherwise email me with what you need (neale.shepherd@airliquide.com) and I'll see if I've got some used ones. If the threads are duff what are the nuts in the shell (sills and chassis legs) or the threads in the alloy towers like, if you have to rethread the captive bits you might as well go up a bolt size and change to a standard ISO thread, and bore out the alloy retention cones.  A courser thread makes more sense in components exposed to the vagaries of weather and salt anyway.

Best wishes, Neale
Logged
thegadsby
Lapsed
Member
**
Offline Offline

Posts: 15



« Reply #5 on: 09 February, 2010, 05:20:05 PM »

Hi there

thanks for the reply

the captive nuts are fine and have recut the threads

4 off of the main bolts in fair order would be great can recut with a die

John
Logged
ncundy
Lapsed
Rebel Poster
*
Offline Offline

Posts: 980



« Reply #6 on: 09 February, 2010, 05:33:56 PM »

John, ask Neale about the roller bearing front spring mount. I have seen one he has made - very nice.
Neil
Logged

1969 Fanalone, Mazda RX-8, Fiat Multipla
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines