Lancia Motor Club Forum Banner
08 October, 2024, 03:57:09 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Steering Box  (Read 2739 times)
0 Members and 1 Guest are viewing this topic.
Nick Gramaglia
Member
****
Posts: 63



« on: 14 September, 2009, 04:08:55 PM »

Hi

Has anyone replaced the two oil seals in the steering box. I have removed the box from car and bought new seals, removed the 36mm nut that secures the drop arm to the splined shaft but cannot seperate the two. I bought a two leg puller but it was not strong enough for the job.Any sugestions ?

Nick     
Logged
ncundy
Lapsed
Rebel Poster
*
Posts: 980



« Reply #1 on: 14 September, 2009, 05:32:38 PM »

Heat, cool, hammer and patience I'm afraid. A puller with a blow torch should maybe shift it. But don't be surprised if it takes a few days (seriously).

Some sources of information - and encouragement  Cheesy

http://www.viva-lancia.com/fulvia/qanda/steering/index.php

http://www.lancisti.com/forum/showthread.php?t=3065
Logged

1969 Fanalone, Mazda RX-8, Fiat Multipla
nistri
Megaposter
*
Posts: 558


« Reply #2 on: 15 September, 2009, 11:11:17 AM »

There is a special Lancia steering box puller which significantly helps because it does not tend to slip away like other standard pullers. You may also need heat and tapping the puller as you try to separate the parts. Andrea
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.073 seconds with 21 queries.