Lancia Motor Club Forum Banner
18 November, 2019, 08:29:37 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Fulvia rubber bonnet bump stops  (Read 1315 times)
0 Members and 1 Guest are viewing this topic.
zagatoman
Lapsed
Senior Member
*****
Offline Offline

Posts: 198


Looking a lot better


« on: 19 July, 2009, 04:43:26 PM »

Hi again all.

Another request you might be able to help with.

Looking for the rubber bonnet bump stops that are screwed on the body and help stabilizes the bonnet on a Lancia Fulvia, has two cone shaped ones in the back corners and two button ones at the front that are adjustable. Need all four but if you only have a couple, please get in touch.

Don’t forget, Still looking for the heater box for the engine compartment from a Series 1 Fulvia or Fulvia Zagato. Also good condition rear of-side (drivers side) bumper quarter for a series one Fulvia Zagato.

Thanks again, Paul
Logged

Series 1, 1.3 Fulvia Zagato 1969
fay66
Permanent resident
**
Offline Offline

Posts: 5730



« Reply #1 on: 19 July, 2009, 05:14:12 PM »

Try Cavellitos,
I got four cone shaped ones for my 2c from them, admitted about 4-5 years ago, but certainly worth dropping him an email.

Brian
8227 Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
1999 Suzuki Wagon R+ GL, now my daughters
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
St Volumex
Lapsed
Rebel Poster
*
Offline Offline

Posts: 613


Owner of RetroPart


WWW
« Reply #2 on: 19 July, 2009, 06:31:43 PM »

Hi Paul,

We just bought some rear bonnet stops (the cones) from Omicron at GBP1.79 each - much cheaper than anything w could get from Italy.

Kindest regards,
Logged

Guy McDougall
www.facebook.com/RetroPart
Rare Parts for Rare Machines
Appia Coupé S3 (Rosina), Appia Berlina S3 (La Giaconda), Fulvia 1.3S 5 spd coupé (Tigger, belongs to Carol), Beta Spyder S2 (Vivaldi), Montecarlo Spyder S2, HPE VX (Pugsly) etc
zagatoman
Lapsed
Senior Member
*****
Offline Offline

Posts: 198


Looking a lot better


« Reply #3 on: 20 July, 2009, 11:58:30 AM »

I contacted Omicron last week and they wanted to charge me £8 each for the bump stops, will have to ask them again, I probably misheard.

Still would like to hear from anyone that might have some knocking around.


Paul
Logged

Series 1, 1.3 Fulvia Zagato 1969
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3597



« Reply #4 on: 20 July, 2009, 12:33:44 PM »

Paul

On my series 2 sport there are only 2 at the rear somewhat square castle shaped.

I have checked my parts book and thats all they show.

What you describe are the coupe fixings (very familiar as I have them on my HF).

Has yours been modified? If so could you send me some photos and I might do the same.

On basis of photos i may have some spares??

Tim
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
zagatoman
Lapsed
Senior Member
*****
Offline Offline

Posts: 198


Looking a lot better


« Reply #5 on: 06 August, 2009, 12:16:19 AM »

Hi Tim

The Bump stops are for my series one Fulvia, not my Zagato, so any you have to fit a series 2 or 3 Fulvia will be fine.

Hope you are able to help,

Paul
Logged

Series 1, 1.3 Fulvia Zagato 1969
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines