Lancia Motor Club Forum Banner
10 December, 2024, 12:42:31 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: scary moment  (Read 7203 times)
0 Members and 1 Guest are viewing this topic.
dhla40
Senior Member
*****
Posts: 189


« on: 27 June, 2009, 01:40:45 PM »

Had a rummage through the spares that came with my car today and found the drip tray/heatshield for under the carbs so thought I would refit it.  Big mistake, with the  tray in place it made a direct short with the alternator main feed terminal Shocked luckily I checked this before connecting the battery avoiding fireworks.  Is this a known problem or do I have the wrong alternator/fan belt combination?  The alternator is a ducellier and the belt is 763mm, even with the tray removed the gap between the bottom of the front carb and the live terminal looks to close for comfort , would like to hear any thoughts on this.

Sean
Logged

1976 1.3s coupe
1973 1.3s coupe
1982 montecarlo project
1976 alfa GT
1981 alfa spider
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #1 on: 27 June, 2009, 06:26:00 PM »

Sean

from memory your alternator/belt combo is right. If you are not at the end of adjustment the the belt is right and also not stretched.

The tray should go over the top of the alternator so I dont see how the terminal fouls it unless the feed wire is mounted incorrectly. It is all very tight.

The drip tray also needs a plastic fule pipe to take away any drips to below sump level.

The tray should be fitted at all costs to prevent a bbq under the bonnet!

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
dhla40
Senior Member
*****
Posts: 189


« Reply #2 on: 28 June, 2009, 12:44:08 AM »

Hi Tim

There is no way I can fit the tray without making contact with the alternator.  I think I will have to try and move the alt forward or fit a shorter belt to move it down a bit, either way the clearance will be minimal.  At the moment the proximity of 12v and leaking fuel from the bottom of the carb is worrying.

Sean 
Logged

1976 1.3s coupe
1973 1.3s coupe
1982 montecarlo project
1976 alfa GT
1981 alfa spider
fay66
Permanent resident
**
Posts: 6233



« Reply #3 on: 28 June, 2009, 01:39:19 AM »

Hi Sean,
Any photos?

Brian
8227 Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #4 on: 28 June, 2009, 08:57:47 AM »

Sean

as per Brian... r u sure you a) have the right piece of metal mascarading as a tray, or indeed have you fitted the tray as per a fulvia fit. You are right to try and sort!

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #5 on: 28 June, 2009, 12:04:20 PM »

Sean

I have just had a look at my drip tray and where you have the shaped (curved up) part at the front to clear the alternator you should have about a finger thickness clearance between the tray undersdide and the top of the alternator.

Tim

Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
ColinMarr
Permanent resident
**
Posts: 1660



« Reply #6 on: 28 June, 2009, 01:56:10 PM »

Sean,

The photo below shows how mine looked at the start of the ‘red-light saga’ that I posted in January (see earlier posts under Fulvia Alternator replacement)

It is a fiddle to re-fit the drip tray, but it must be a good thing to have with the carbs in such close proximity to the alternator.

The photo shows what a snug fit it is and how close the tray is to the Exciter terminal (black wire) of the alternator. The main power terminals (red wire) are much further away and I can’t see how these could come in contact with the tray.

Colin


* IMG_0503a.jpg (150.97 KB, 768x576 - viewed 456 times.)
Logged
fay66
Permanent resident
**
Posts: 6233



« Reply #7 on: 28 June, 2009, 05:42:20 PM »

Sean,

The photo below shows how mine looked at the start of the ‘red-light saga’ that I posted in January (see earlier posts under Fulvia Alternator replacement)

It is a fiddle to re-fit the drip tray, but it must be a good thing to have with the carbs in such close proximity to the alternator.

The photo shows what a snug fit it is and how close the tray is to the Exciter terminal (black wire) of the alternator. The main power terminals (red wire) are much further away and I can’t see how these could come in contact with the tray.

Colin


Bit better with a dynamo!

Brian
8227 Cool


* DSCF0002 copy reduced.jpg (141.32 KB, 800x585 - viewed 461 times.)
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
ColinMarr
Permanent resident
**
Posts: 1660



« Reply #8 on: 28 June, 2009, 07:24:40 PM »

Brian,

Yes, and easier to see, and take photos of, when you don’t have a sideways-opening bonnet, and apparently without as radiator!

Colin
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #9 on: 28 June, 2009, 09:53:08 PM »

I often wondered why dynamo's didnt give enough charge but seeing that belt I understand!!!

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
fay66
Permanent resident
**
Posts: 6233



« Reply #10 on: 28 June, 2009, 10:45:08 PM »

I often wondered why dynamo's didnt give enough charge but seeing that belt I understand!!!

Tim

Unlike the Coupes, when it's all attached you can't even see it, let alone take a photo, but I must admit I think the Sport has even worse access than the Berlina, and that's saying something Roll Eyes

Brian
8227 Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
Neil Lewis
Guest
« Reply #11 on: 28 June, 2009, 10:49:58 PM »

It pprobably sounds obvious but...  Why not just fit a shorter alternator belt and be done with it.  That's exactly what I did, it was a bit of a palaver to get the belt on (but Fulvia belts are always difficult to fit with the radiator so close), but I had the fingers width afterwards which was fine.

By the way, older belts are narrower than the newest ones.  So an old belt will appear longer when fitted because it goes deeper into the pulleys.

Neil
Logged
dhla40
Senior Member
*****
Posts: 189


« Reply #12 on: 29 June, 2009, 12:22:06 PM »

Sorted Grin at some time in the past the alternator had been taken apart and reassembled incorrectly putting the main terminal at the top.  I just had to undo the through bolts and spin the body to put the exciter terminal at the top and the main feed safely below. Might be something worth checking if you have a ducellier, not sure if the bosch alt could have the same clearance problem.  If something can be done wrong etc, etc.

Sean
Logged

1976 1.3s coupe
1973 1.3s coupe
1982 montecarlo project
1976 alfa GT
1981 alfa spider
fay66
Permanent resident
**
Posts: 6233



« Reply #13 on: 29 June, 2009, 02:45:09 PM »

Sorted Grin at some time in the past the alternator had been taken apart and reassembled incorrectly putting the main terminal at the top.  I just had to undo the through bolts and spin the body to put the exciter terminal at the top and the main feed safely below. Might be something worth checking if you have a ducellier, not sure if the bosch alt could have the same clearance problem.  If something can be done wrong etc, etc.

Sean

Excellent example of Sods Law Shocked

Brian
8227 Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #14 on: 29 June, 2009, 09:16:05 PM »

Easy done on reassembling the alternator (I've done it myself when rebuilding but realised before refitting).

kicking myself for not thinking of it but a good example of picking up someone elses work.

Well done for sorting.

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.057 seconds with 21 queries.