Lancia Motor Club Forum Banner
11 October, 2024, 10:10:01 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Flaminia GT bodywork  (Read 5511 times)
0 Members and 1 Guest are viewing this topic.
dannels
Guest
« on: 20 January, 2009, 01:24:00 PM »

Hi All,
I'm restoring my FlaminiaGT - see here for detail http://www.flaminiagt.co.uk
..and have a question - there is a gap between the inner steel wheel arch and the outer aluminium wing. Does anyone know what was originally between the two - was it a rubber seal or some other material? Does anyone know where I can find something that will give a good seal and keep the steel away from the outer wing?
Thanks
Dave


* IMG_0526.JPG (355.23 KB, 1600x1200 - viewed 541 times.)
Logged
Alwyn Price
Guest
« Reply #1 on: 20 January, 2009, 07:34:20 PM »

Hi All,
I'm restoring my FlaminiaGT - see here for detail http://www.flaminiagt.co.uk
..and have a question - there is a gap between the inner steel wheel arch and the outer aluminium wing. Does anyone know what was originally between the two - was it a rubber seal or some other material? Does anyone know where I can find something that will give a good seal and keep the steel away from the outer wing?
Thanks
Dave

As a retired Water Engineer, I can recommend two Denso products.  Easy to use and virtually foolproof.  Coat both surfaces with Denso paste, which is like grease, and pack any gaps with Denso filler.  I'm not sure of the current correct name but 30 years ago we called it "monkey muck" when you see it you'll know why. Fill any gap by rolling the filler into a sausage and push home with a wooden peg tapping with a hammer, if neccessary
Logged
Sliding Pillar
Permanent resident
**
Posts: 1718



« Reply #2 on: 20 January, 2009, 08:03:17 PM »

Originally it would have been a sponge rubber seal. (not the best solution as it held water!!)  You can get suitable seals from Paul Beck Vintage supplies or Woolies (No not Woolworths!).
Logged

1955 Aurelia
1961 Lamborghini
dannels
Guest
« Reply #3 on: 28 January, 2009, 12:56:31 PM »

Thanks guys - having asked around I think I going for a combination of rubber strip and sealant to bond to the inner/outer arches.

I'll take a look at Paul Beck - as I don't know them - thanks for the tip!

Cheers
Logged
Sliding Pillar
Permanent resident
**
Posts: 1718



« Reply #4 on: 28 January, 2009, 07:59:46 PM »

I have also found another company that specialise in seals of all descriptions, seals+direct I managed to get some seals for the Aurelia Pininfarina hood that were not available anywhere else.
Logged

1955 Aurelia
1961 Lamborghini
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.07 seconds with 21 queries.