Lancia Motor Club Forum Banner
01 December, 2024, 08:07:46 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Stop light switch  (Read 6958 times)
0 Members and 1 Guest are viewing this topic.
davidhowson
Lapsed
Member
***
Posts: 34



« on: 07 December, 2008, 07:06:48 PM »

I am 75% of the way in installing a new wiring loom into my S1 Fulvia, but I can not for the life  of me work out how the brake lights work! Can any of you more knowlegable folk tell me how the brake lights are switched and where the switch would go, please?

Thankyou

-David-
Logged

1968 Fulvia S1, 1.3 Rallye S - Sold
ColinMarr
Permanent resident
**
Posts: 1660



« Reply #1 on: 07 December, 2008, 07:22:04 PM »

David,

On my S1 Sport the brake-light switch is a fixture on the brake pedal mounted below the steering column. It clamps on to the pedal assembly in a most unlikely way - it looks like an afterthought, but it works!

Colin
Logged
Richard Fridd
Permanent resident
**
Posts: 3487



« Reply #2 on: 07 December, 2008, 07:25:09 PM »

mine is fitted to the master cylinder, activated by means of fluid pressure
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
ncundy
Lapsed
Rebel Poster
*
Posts: 980



« Reply #3 on: 07 December, 2008, 07:55:35 PM »

And here's a photo of said switch on the end of the master cylinder:


* DSCF1882.JPG (446.71 KB, 1600x1200 - viewed 537 times.)
Logged

1969 Fanalone, Mazda RX-8, Fiat Multipla
davidhowson
Lapsed
Member
***
Posts: 34



« Reply #4 on: 08 December, 2008, 11:17:46 AM »

Thank you for your replies. The end of my master cylinder has a bolt screwed into the end where your photo shows the switch.
I have another interesting little connection I have found in my box of bits which I will try to take a pictiure of later, as I suspect it is some kind of pressure switch, but I wasn't sure if it had anything to do with a "Brake Failure" light on the dash, but then I don't recall such a light!
My thought is to make a switch that operates of the brake pedal along the lines of Colin's.
I will let you lnow how I get on...

David
Logged

1968 Fulvia S1, 1.3 Rallye S - Sold
ncundy
Lapsed
Rebel Poster
*
Posts: 980



« Reply #5 on: 08 December, 2008, 12:54:25 PM »

I think S2 & 3 master cylinders had the pressure switch deleted (replaced by a large bolt) and used a switch off the pedal. I must admit I am slightly dubious about the arrangement. Somehow I would feel more comfort if I knew the brake lights would come on when I touch the pedal rather than waiting for some pressure build up to (hopefully) trigger the lights.
Logged

1969 Fanalone, Mazda RX-8, Fiat Multipla
FulviaFiend
Guest
« Reply #6 on: 08 December, 2008, 01:06:46 PM »

I agree, and concur that S2 and S3 models have a simply switch on the pedal assembly, the simpler the solution the better in my opinion.

Images attached:

FF

* S2_S3Brake System.pdf (146.07 KB - downloaded 286 times.)
* PartsList.pdf (86.66 KB - downloaded 444 times.)
Logged
davidhowson
Lapsed
Member
***
Posts: 34



« Reply #7 on: 08 December, 2008, 01:53:52 PM »

FF - A Fulvia Friend indeed! Thank you for the diagrams, very useful. Looks like the switch is the way to go. Does anyone have a spare one they wish to sell??

I may have a few other questions if I can't work out a solution on certain parts of the wiring; the car did not have a loom when I bought it (many years ago now) so I am building one bit by bit, but to my own design rather than trying to re-create the Lancia one.

ONce again, thank you to everyone for your replies!

David
Logged

1968 Fulvia S1, 1.3 Rallye S - Sold
ColinMarr
Permanent resident
**
Posts: 1660



« Reply #8 on: 08 December, 2008, 06:29:14 PM »

Omicron listed “Pedal actuated Brake light switch” in their 1998 catalogue at £4.05 each.

My car is early 1st Series, but the master cylinder is 2nd Series and so has the pedal mounted switch. It is fortunate that the 1st Series pedal assembly, which is quite different to 2nd Series, is amenable to fitting this later type switch.

Colin
Logged
nistri
Megaposter
*
Posts: 564


« Reply #9 on: 11 December, 2008, 08:48:16 AM »

There is a small difference between S1 and S2 in the operation of the brake lights switch. The S1 brake switch is activated by a certain pressure inside the master cylinder, meaning that the free run of the brake pedal will not activate the rear brake lights. On an S2-3 car, even a small touch to the brake pedal (with no or minimal brake pressure) will switch the rear lights on.
Regards, Andrea
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
davidhowson
Lapsed
Member
***
Posts: 34



« Reply #10 on: 19 January, 2009, 04:25:49 PM »

An update on this one...

After looking at the various options, I decided to buy a mechanical plunger type switch to do this job as I considered it more reliable and easier to fit than the pressure sensitive switch that came off.

So I bought a switch from AES (Auto Electrical Supplies) over their web site at a cost of about £11. Arrived very quickly too.

The switch is a universal one with one pair of contacts that make when the plunger is released and one pair that break when the plunger is released, so it will work in all situations!

The only slight draw back was that I had to drill out the hole in the peddle box as the plunger is M10 fitting. But the job took about 20 mins from start to finish and I'm very happy with the result.

AES sell a fantastic selection of electrical components and I would recommend them to any member looking for such parts. Smiley

-David-

Logged

1968 Fulvia S1, 1.3 Rallye S - Sold
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.073 seconds with 20 queries.