Lancia Motor Club Forum Banner
04 November, 2024, 08:49:21 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Engine component balancing  (Read 10454 times)
0 Members and 1 Guest are viewing this topic.
ncundy
Lapsed
Rebel Poster
*
Posts: 980



« Reply #15 on: 15 December, 2008, 08:57:36 PM »

Thanks John,
That makes sense - do they run it for long, and do they mark and drill ( /add weight) the crank in situ or mark it and remove it ?
I guess the thrust face on the Lambda pistons may have been slightly worn in profile ?
Thanks for the info gentlemen - it's all adding to the mix and hopefully getting me to the right place.
Neil
Logged

1969 Fanalone, Mazda RX-8, Fiat Multipla
JohnMillham
Lapsed
Permanent resident
**
Posts: 1045



« Reply #16 on: 16 December, 2008, 01:24:04 PM »

With both of my motors, I asked that, if possible, they would add weight, rather than remove it from the crankshafts. The Lambda ended up with weights added to the flywheel and fanbelt pulley, but the Augusta had weight added to the pulley, but a small amount removed from the periphery of the flywheel. With more modern, presumably stronger crankshafts, it would probably be OK to remove some weight from the crankshaft itself, if necessary. It's important to have the oil pump working, by the way, to enable the crankshaft to be kept full of oil, the weight of which would have an effect on the engine's balance. My Lambda pistons are a bit too much of a sloppy fit in the bores! Unfortunatley, not just "slightly worn".
 Regards, John
Logged
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.061 seconds with 21 queries.