Lancia Motor Club Forum Banner
06 December, 2024, 10:53:18 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Fulvia Montecarlo / Indicator Lights  (Read 3385 times)
0 Members and 1 Guest are viewing this topic.
FulviaFiend
Guest
« on: 13 August, 2008, 08:14:07 PM »

Need details on front indicator light fittings for Fulvia Montecarlo…

I have my original lights (carello 11.638.000) but they will not fit into the front lower panel, the slots are completely the wrong dimensions, not wide enough but at the same time also too deep leaving a gap of approx 5-6mm top and bottom (i can only presume the panel has been replaced by a bad copy?), also the curves of the panel mean nothing will sit properly, Lancia must have produced a proper light fitting for bumper-less HF/Montecarlos?Huh?

TAV's give a different part number, but these seem to be the same specification only with chromed trim/clear lenses, can anyone help???

Is there a genuine part that will fit properly or has anyone any idea on a good substitute?

Many thanks,
FF

Need a drink!!!!!!!!!!!!!!!!!!
Logged
rogerelias
Rebel Poster
*
Posts: 955


MY 1600HF IN HEARTBEAT GARAGE


« Reply #1 on: 13 August, 2008, 09:19:53 PM »

If it helps, the 1600 shell that the monte carlo uses, has a different front lower apron, indeed the holes are larger than the 1300 ones, i found that out when i removed my bumpers on my 1600hf, and went to put VW Golf mk1 front indicator lamps in the lower apron holes, like i used to use on previous 1300 Fulvias, and found out they fell straight through the holes, on monte carlo models i think they use a chrome indicator surround that screws to the front panel. if in any doubt, contact Alan Fairclough on this forum, he has a monte carlo, and i am sure will help you out. Good Luck. Roger. Sermon Ends. Wink
Logged

FULVIA 1600HF LUSSO
1958 VELOCETTE MAC
Triumph Bonneville t120v 1972
1968 MGC ROADSTER
1958 Series 2 Appia berlina
FulviaFiend
Guest
« Reply #2 on: 13 August, 2008, 10:12:38 PM »

If it helps, the 1600 shell that the monte carlo uses, has a different front lower apron, indeed the holes are larger than the 1300 ones, i found that out when i removed my bumpers on my 1600hf, and went to put VW Golf mk1 front indicator lamps in the lower apron holes, like i used to use on previous 1300 Fulvias, and found out they fell straight through the holes, on monte carlo models i think they use a chrome indicator surround that screws to the front panel. if in any doubt, contact Alan Fairclough on this forum, he has a monte carlo, and i am sure will help you out. Good Luck. Roger. Sermon Ends. Wink

I think I have the right indicators (lancia carello 11/630/000), they should be the same size as Carello 16/631/000's but as you said they are too small on the height and too wide on the width (Huh?) there is no way they will fit, the HF/Montecarlos must have a completely different size/shape??? I tried MK1 Golf units already and agree they just fall through the slots… will try to contact Alan and get his thoughts, many thanks…
FF
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.042 seconds with 20 queries.