Lancia Motor Club Forum Banner
03 December, 2024, 02:55:56 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Horn wire in steering wheel  (Read 950 times)
0 Members and 1 Guest are viewing this topic.
HBG
Megaposter
*
Posts: 295


« on: 10 August, 2024, 11:55:34 AM »

Hi folks.

The horn as been a bit temperamental recently so I pulled off the steering wheel centre button as moving it had sometimes made the horn work.

What I found was a loose wire which when touched on a spring/ threaded insert allowed the horn to work.

The pic attached shows the part to connect to, but would anyone know what sort of connection it is before I remove the steering wheel? If possible I'd like to reattach the wire in the simplest way.

Thanks


* 20240810_122134.jpg (1548.95 KB, 4032x3024 - viewed 123 times.)
Logged
HBG
Megaposter
*
Posts: 295


« Reply #1 on: 10 August, 2024, 12:32:25 PM »

Do I just need a short screw, crimp on terminal on the wire?
Logged
HBG
Megaposter
*
Posts: 295


« Reply #2 on: 12 August, 2024, 07:04:37 PM »

On closer inspection, it's a spring in there. What's the method of attaching the wire? Am I missing some sort of plug?
Logged
Richard Fridd
Permanent resident
**
Posts: 3487



« Reply #3 on: 13 August, 2024, 07:17:36 AM »

 Is it a ball bearing/ compression spring arrangement?Can't really see in the image.

  Richard
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
HBG
Megaposter
*
Posts: 295


« Reply #4 on: 13 August, 2024, 07:29:05 AM »

I don't really know. Having looked at the part on the Pieces Fulvia website, I can see what it does, but no clue as to the correct method of attaching a wire to it. I don't want to remove the steering boss if I don't have to, so for now I've put a very small crimped spade terminal on the end of the wire, folded it over and pushed it in the hole to contact the spring. It doesn't come out easily and the horn works fine.

I would prefer to do a proper job if only I knew what that was!
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5049



« Reply #5 on: 13 August, 2024, 08:04:54 AM »

It should be a carbon brush IIRC - see parts, Is this your S2 wheel arrangement?


* IMG_20240813_083523425.jpg (445.52 KB, 1600x900 - viewed 123 times.)
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
LCR1967
Member
***
Posts: 34


« Reply #6 on: 13 August, 2024, 08:50:49 AM »

It is a spring loaded carbon brush. The one on my S1 was worn so I bought a suitibly sized electric motor brush. A much cheaper option than the one offered by Pieces-Fulvia.
Logged
HBG
Megaposter
*
Posts: 295


« Reply #7 on: 13 August, 2024, 03:25:54 PM »

Yes Tim, mine is as per the diagram. The diagram doesn't show how the wire attaches though.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.031 seconds with 20 queries.