Lancia Motor Club Forum Banner
11 December, 2024, 06:33:37 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: SUBFRAME BOLTS  (Read 542 times)
0 Members and 1 Guest are viewing this topic.
Nigel1967
Member
**
Posts: 17


« on: 12 April, 2024, 11:19:52 AM »

Hi All... happy Friday....  i have a squeak from the front subframe where it attaches to the sill. I read on another thread that it could be a case of simply tightening the bolt that holds the bushings however looking at mine, i can see the threaded bold sticking out under the car with two nuts on the end. Its the same both sides but looking at the workshop manual it looks like the bolt should be the other way up with the bold head protruding down under the car.
Any thoughts greatly appreciated.
Many thanks
Nigel.
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #1 on: 12 April, 2024, 02:39:39 PM »

As you observe this is not factory. that area is vulnerable to corrosion and there are not many Fulvias that have not had extensive metal repairs in that area. I would advise a close look for rust and past repairs.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.028 seconds with 21 queries.