Lancia Motor Club Forum Banner
31 October, 2024, 10:57:06 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Flanged bolts  (Read 673 times)
0 Members and 1 Guest are viewing this topic.
Wangler
Megaposter
*
Posts: 303


« on: 31 March, 2024, 08:05:14 AM »

There seem to be many examples of where a 13mm nut or bolt with a washer could be replaced by flanged bolt.

Aside from purism/originality, is there any reason why one shouldn’t use a flanged bolt? I’m fed up with dropping washers!
Logged

Fulvia Coupe 1976
Fulvia Coupe 3 1975
chriswgawne
Permanent resident
**
Posts: 2081



« Reply #1 on: 31 March, 2024, 08:43:53 AM »

Where one is screwing the bolt into aluminium (as is frequently the case with older Lancias), I would say that a floating washer was always preferable to avoid damaging the face of the aluminium. With a flanged bolt, the flange has to rotate as the bolt is torqued whereas with a floating washer, the washer can rotate against the bolt head, not the aluminium component the underside of the washer is sitting against..
Does that make any sense?
Chris
Logged

Chris Gawne
Mobile: 07778 216552
Wangler
Megaposter
*
Posts: 303


« Reply #2 on: 31 March, 2024, 11:21:51 AM »

Thanks Chris

I understand where you’re coming from. My feeling is that they wouldn’t cause a problem, although I am happy to be disabused! I don’t see any problem with the exhaust manifold or engine mounts (obviously steel) or with certain bolt on bits such as the inlet manifold and carburettors. Anything with Allen bolts I would not change.

This is a very interesting website in respect of flange bolts.

https://www.fbabolt.com.au/flange-bolt-tech.html
Logged

Fulvia Coupe 1976
Fulvia Coupe 3 1975
Simon B
Member
***
Posts: 37


« Reply #3 on: 31 March, 2024, 05:34:04 PM »

Flanged nuts may have there uses but I would agree with Chris on retaining floating washers, certainly on aluminium. It likely wouldn't be your problem but trying to remove a rusty flanged nut from a steel assembly is also probably more difficult than a nut and separate washer.
Anyway who needs flanged nuts? Have you tried using your magnet to help fit stuff instead of just picking things up that have been dropped!
P.s. can I have your old fixings!


* IMG_5075.jpeg (76.43 KB, 480x640 - viewed 112 times.)
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.068 seconds with 21 queries.