Lancia Motor Club Forum Banner
14 December, 2024, 07:49:00 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Slipping out of 2nd gear  (Read 1304 times)
0 Members and 1 Guest are viewing this topic.
Keithver
Senior Member
*****
Posts: 144



« on: 20 November, 2023, 01:34:14 PM »

Does anyone know if there are adjustments to the 5 speed gearbox.
When I approach a stop street in 2nd and take my foot off the accelerator, it slips out of 2nd. If I hold the lever in position it stays in 2nd without any force. Under acceleration she remains in gear. All other gears are fine.
Have I got an incorrect forward spring TAV 29 18 (below). My spring looks to be the same size.
The photo below shows a smaller spring that Pieces say is for the gearbox. Where does this go please
All suggestions would be appreciated


* IMG_1339.jpg (521.05 KB, 2016x1512 - viewed 88 times.)

* Capture.JPG (30.85 KB, 587x401 - viewed 252 times.)
« Last Edit: 20 November, 2023, 01:36:03 PM by Keithver » Logged

'72 series 2 Fulvia 1,3s
lancialulu
Press Officer
Permanent resident
*****
Posts: 5058



« Reply #1 on: 20 November, 2023, 03:07:07 PM »

That smaller spring is correct. Indeed any similar spring will work but this is unlikely to cure slipping out of second.

On the dipstick side of the gearbox is a small lateral housing which contains a ball and spring (see Tav 33) you may find a stronger spring will help solve the problem but more correctly it is likely the 2nd gear is worn.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Keithver
Senior Member
*****
Posts: 144



« Reply #2 on: 23 November, 2023, 10:05:07 AM »

Thanks Tim. I will replace the spring with the smaller one and check the lateral housing on the weekend. I hope that will sort it out. Other wise It'll have to wait until I remove the box one day
Logged

'72 series 2 Fulvia 1,3s
lancialulu
Press Officer
Permanent resident
*****
Posts: 5058



« Reply #3 on: 23 November, 2023, 10:14:06 AM »

the plug in the lateral housing sometimes gets corroded in. At the end is an m3 thread where you can put a bolt to pull the plug out....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Keithver
Senior Member
*****
Posts: 144



« Reply #4 on: 23 November, 2023, 11:33:20 AM »

all the tricks of the trade. Smiley Thanks for the tip
Logged

'72 series 2 Fulvia 1,3s
lancialulu
Press Officer
Permanent resident
*****
Posts: 5058



« Reply #5 on: 23 November, 2023, 12:28:54 PM »

all the tricks of the trade. Smiley Thanks for the tip
Not trade....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.04 seconds with 21 queries.