10 December, 2024, 12:09:39 PM
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
:
Need to contact the Forum Administrator? e-mail
forum.admin@lanciamc.co.uk
- Copy deadline for Viva Lancia is 12th of each month. - For Events e-mail
events@lanciamc.co.uk
- To Join the club go to
http://www.lanciamc.co.uk/join.htm
Home
Help
Search
Calendar
Register
Lancia Motor Club
>
Model Technical and Interest
>
Aprilia, Ardennes and Ardea
>
Webers...again!
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: Webers...again! (Read 1702 times)
0 Members and 1 Guest are viewing this topic.
welleyes
Member
Posts: 89
Webers...again!
«
on:
20 July, 2023, 10:53:59 AM »
We are just checking over a Weber with a view to putting it on the Aprilia. It was bought as having come off an Aprilia; as it is correctly jetted, we are sure that must be true. It seemed to be in good shape except that a washer had been placed under the accelerator pump jet with the result that the lid was held open about twelve thou even with a gasket under it. Fortunately, our engineering skills rose to the challenge and the washer was removed.
As the carb has been sleeved to the 32mm of the standard manifold, we assume that was done by or for Alperton. Does anyone know why Alperton used the Tipo 36 and sleeved it rather than using a smaller one as Lancia did in Italy? Was the 36 easier to get, cheaper or more desirable in some way that I cannot fathom? Incidentally, it is a bronze one, so could double as an objet d’art. I feel sure that we will be pestering the forum with naïve questions about the 36 DR5 SP before long. The number is 1714; if that indicates production of two thousand plus, what else used this carburetter?
Andy and Stuart Tallack
Logged
welleyes
Member
Posts: 89
Re: Webers...again!
«
Reply #1 on:
23 July, 2023, 07:44:37 PM »
I can venture a guess in reply to my own question! There were not many single choke Webers with both an accelerator pump and the extra jet to provide more fuel at wide throttle opening by means of a jet opened by a needle beneath the pump piston. Perhaps they were used on early Alfa 1900 or 2500 cars and became redundant when they put twin choke Webers on. Who knows? Not me. It was obviously worth sleeving them.
To my great surprise, I have managed to cleared the internal drillings and the pump actually works. The two bad pieces of news are first,that the pump body is made from a zinc based alloy which was not intended to last for seventy years and second, that I cannot find any way to dismantle the pump as one spring seems to have been fixed so that it can only be removed destructively. If anyone knows otherwise, I would love to hear: I wanted to dismantle and measure it as I thought that it would be possible to fabricate a new and stronger pump body if I could measure it all.
If anybody needs it, I translated the German language description of the Weber Vergaser Typ 36 DR5 SP. Until I did that, I had no idea what the extra jet sticking out of the top of the carb was for.
Stuart
Logged
GG
Megaposter
Posts: 570
Re: Webers...again!
«
Reply #2 on:
23 July, 2023, 09:07:27 PM »
32 DR 7 SP were used on the two liter B20s. I think the number refers to mounting conditions, as a no. 3 and 10 have also been seen and are largely the same. Perhaps these are similar to yours.
Can email larger versions if anyone interested. Also posted on:
http://www.lanciaaurelia.info/carburetors1.html
Weber DCZ A gnl scrn.jpg
(2096.19 KB, 931x1280 - viewed 129 times.)
Weber DR B gnl scrn.jpg
(1891.28 KB, 931x1280 - viewed 122 times.)
«
Last Edit: 23 July, 2023, 09:10:30 PM by GG
»
Logged
Appia C10, Flavia 2000 coupe, Fulvia Fanalone
GG
Megaposter
Posts: 570
Re: Webers...again!
«
Reply #3 on:
23 July, 2023, 09:09:01 PM »
32 DR 7 SP were used on the two liter B20s. I think the number refers to mounting conditions, as a. 3 and 10 have also been seen and are largely the same. Perhaps these are similar to yours.
weber_dr_a_sml2.jpg
(757.18 KB, 675x929 - viewed 125 times.)
weber_dr_b_sml2.jpg
(95.26 KB, 676x930 - viewed 132 times.)
Logged
Appia C10, Flavia 2000 coupe, Fulvia Fanalone
welleyes
Member
Posts: 89
Re: Webers...again!
«
Reply #4 on:
24 July, 2023, 06:35:21 AM »
Pretty well the same, but with the addition of accelerator pump. That confused me at first as it does not work the same way as the later Weber piston pump. It was an interesting exercise and just the sort of thing recommended to stave off the threat of age related brain fog!
Stuart
Logged
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> About the LMC Forum
=> General Chat
=> Press/Media: Lancias mentioned, seen or wanted!
=> Competition Information
=> Events 2024
=> Events 2025
=> Local Events
=> LMC Legends
=> Links
-----------------------------
Model Technical and Interest
-----------------------------
=> Pre-Lambda
=> Lambda
=> DiLambda
=> Artena and Astura
=> Augusta
=> Aprilia, Ardennes and Ardea
=> Aurelia
=> Appia
=> Flaminia
=> Flavia
=> Fulvia
=> Stratos
=> Beta and Montecarlo
=> Gamma
=> Delta and Prisma
=> Dedra, Thema and Delta (2nd series)
=> Ypsilon, Musa and Y10
=> Kappa
=> Thesis
=> Delta (2008-)
=> Commercial Vehicles
=> Other Lancia Models
-----------------------------
Buy, Sell and Search
-----------------------------
=> Members' cars for sale
=> Lancia vehicles for sale
=> Lancia vehicles required
=> Spares for sale
=> Spares required
-----------------------------
Events Archive
-----------------------------
=> Events 2011
=> Events 2012
=> Events 2013
=> Events 2014
=> Events 2015
=> Events 2016
=> Events 2017
=> Events 2018
=> Events 2019
=> Events 2020
=> Events 2021
=> Events 2022
=> Events 2023
Loading...