Lancia Motor Club Forum Banner
31 October, 2024, 11:54:35 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Rattle behind the Touring identity plate on the bulkhead  (Read 955 times)
0 Members and 1 Guest are viewing this topic.
FERGTS246
Senior Member
*****
Posts: 175


« on: 14 July, 2023, 07:03:48 PM »

Hi, I've got an incredibility annoying rattle coming from behind the Touring identity plate on the bulkhead when my foot is taken off the accelerator pedal. There seems to be a void behind the bulkhead and I can't see how one would gain access to it. I can't see any access under the dash and the only possible access I can see under the bonnet would be taking off the thin 'U' shaped aluminium trim that covers bulkhead upper lip and flat painted panel upper lip - see pink arrow in image attached.
However even if I got the trim off I don't think I would be able to part the bulkhead and painted panel to gain access.
Anyone got any ideas for gaining access?
I could take off the Touring identity plate, cut a hole where the plate was - but that seems a bit excessive.
Thanks
Chris


* Ali-Lip-Bulkhead.jpg (173.99 KB, 664x351 - viewed 163 times.)
Logged
FERGTS246
Senior Member
*****
Posts: 175


« Reply #1 on: 29 July, 2023, 12:40:58 PM »

I found the noise was coming from the vacuum check valve. The rubber seal in the valve wasn't seated properly. Corrected that - the noise has gone.
Chris
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.06 seconds with 20 queries.