04 December, 2024, 09:39:20 PM
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
:
Need to contact the Forum Administrator? e-mail
forum.admin@lanciamc.co.uk
- Copy deadline for Viva Lancia is 12th of each month. - For Events e-mail
events@lanciamc.co.uk
- To Join the club go to
http://www.lanciamc.co.uk/join.htm
Home
Help
Search
Calendar
Register
Lancia Motor Club
>
Model Technical and Interest
>
Fulvia
>
1969 Lancia Fulvia 1.3 Coupe
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: 1969 Lancia Fulvia 1.3 Coupe (Read 1834 times)
0 Members and 1 Guest are viewing this topic.
Shelley
Lapsed
Member
Posts: 15
1969 Lancia Fulvia 1.3 Coupe
«
on:
07 June, 2023, 05:05:26 PM »
Hi,
Could anyone help with how to fit an air cleaner support bracket? We have recently purchased a support bracket as we realised ours was missing.
We tried to fit it as per photos we found on the internet and pictures in the manual however it results in the carburetor trumpet holes not lining up with the trumpets. Are there different lengths of brackets for different engines / models? Or are we fitting incorrectly? Please see photos attached.
Thank you,
Shelley
Lancia 1.jpg
(630.87 KB, 2016x1512 - viewed 124 times.)
Lancia 2.jpg
(686.29 KB, 2016x1512 - viewed 127 times.)
Logged
Scott
Megaposter
Posts: 306
Re: 1969 Lancia Fulvia 1.3 Coupe
«
Reply #1 on:
07 June, 2023, 05:35:28 PM »
Two different sizes are implied by
https://ricambilanciafulvia.it/en/?s=Bracket+air+filter&post_type=product&lang=en
ignoring the replica item so it seems possible you have the wrong size.
That suggests a difference between S1 and later models but I'll let folk far more knowledgeable than me comment!
«
Last Edit: 07 June, 2023, 05:57:33 PM by Scott
»
Logged
Shelley
Lapsed
Member
Posts: 15
Re: 1969 Lancia Fulvia 1.3 Coupe
«
Reply #2 on:
07 June, 2023, 05:53:53 PM »
Oh great! Thank you for looking for me, I think I will be placing a new order!
Logged
Scott
Megaposter
Posts: 306
Re: 1969 Lancia Fulvia 1.3 Coupe
«
Reply #3 on:
07 June, 2023, 06:05:09 PM »
Just one other observation...
On my S2 the box goes on first then the trumpets. The implication from your pics is that you're trying to put the trumpets on first.
Could this result in the bracket then not lining up? Probably a red herring but worth a note.
Logged
Shelley
Lapsed
Member
Posts: 15
Re: 1969 Lancia Fulvia 1.3 Coupe
«
Reply #4 on:
07 June, 2023, 07:33:07 PM »
To be honest, we are not sure of anything!
This was my Dad's Lancia that I inherited in 2019 after he passed away. The car had been in his garage for 40 years and we decided to have it restored, as per his wishes and keep it. The Lancia has just come out of a three year restoration at a 'local-ish' garage and apparently this was the first Fulvia that they had restored.
It is possible that things are not correct (we have had other things go wrong).
If we fit the airbox in the way you have suggested,, would this mean we need a gasket between the carburetor and the airbox and then another between the airbox and the trumpets?
Thank you again! Help is very much appreciated
Logged
Scott
Megaposter
Posts: 306
Re: 1969 Lancia Fulvia 1.3 Coupe
«
Reply #5 on:
07 June, 2023, 08:41:31 PM »
Refer to this post and pic that confirms trumpets go in the box:
https://www.lancia.myzen.co.uk/forum/index.php?topic=1850.15
Yes there should be a gasket between box and carb inlets. Actually two identical gaskets like:
https://shop.omicron.uk.com/products/gasket-carb-to-air-cleaner
No gaskets needed for trumpets inside box ... but a gasket should be present where the two halves of the air box join.
Logged
lancialulu
Press Officer
Permanent resident
Posts: 5051
Re: 1969 Lancia Fulvia 1.3 Coupe
«
Reply #6 on:
07 June, 2023, 08:56:12 PM »
I think you have the correct support strap but as Scott says the air box goes on first then the trumpets inside.
Logged
Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21. 12v
Neil
Permanent resident
Posts: 1316
Re: 1969 Lancia Fulvia 1.3 Coupe
«
Reply #7 on:
07 June, 2023, 10:41:17 PM »
This is the page from the parts book, but does not show the trumpets in side from the other side, but shows the airbox to carb gaskets.
IMG_9144.JPG
(3723.81 KB, 4032x3024 - viewed 136 times.)
«
Last Edit: 07 June, 2023, 10:47:30 PM by Neil
»
Logged
Neil
386
1973 Fulvia S2 1.3
Shelley
Lapsed
Member
Posts: 15
Re: 1969 Lancia Fulvia 1.3 Coupe
«
Reply #8 on:
08 June, 2023, 09:33:50 PM »
Thank you all for your help.
We will try and rectify tomorrow!
Logged
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> About the LMC Forum
=> General Chat
=> Press/Media: Lancias mentioned, seen or wanted!
=> Competition Information
=> Events 2024
=> Events 2025
=> Local Events
=> LMC Legends
=> Links
-----------------------------
Model Technical and Interest
-----------------------------
=> Pre-Lambda
=> Lambda
=> DiLambda
=> Artena and Astura
=> Augusta
=> Aprilia, Ardennes and Ardea
=> Aurelia
=> Appia
=> Flaminia
=> Flavia
=> Fulvia
=> Stratos
=> Beta and Montecarlo
=> Gamma
=> Delta and Prisma
=> Dedra, Thema and Delta (2nd series)
=> Ypsilon, Musa and Y10
=> Kappa
=> Thesis
=> Delta (2008-)
=> Commercial Vehicles
=> Other Lancia Models
-----------------------------
Buy, Sell and Search
-----------------------------
=> Members' cars for sale
=> Lancia vehicles for sale
=> Lancia vehicles required
=> Spares for sale
=> Spares required
-----------------------------
Events Archive
-----------------------------
=> Events 2011
=> Events 2012
=> Events 2013
=> Events 2014
=> Events 2015
=> Events 2016
=> Events 2017
=> Events 2018
=> Events 2019
=> Events 2020
=> Events 2021
=> Events 2022
=> Events 2023
Loading...