05 December, 2024, 07:55:51 PM
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
:
Need to contact the Forum Administrator? e-mail
forum.admin@lanciamc.co.uk
- Copy deadline for Viva Lancia is 12th of each month. - For Events e-mail
events@lanciamc.co.uk
- To Join the club go to
http://www.lanciamc.co.uk/join.htm
Home
Help
Search
Calendar
Register
Lancia Motor Club
>
Model Technical and Interest
>
Aprilia, Ardennes and Ardea
>
handbrake lever set up on brake drums
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: handbrake lever set up on brake drums (Read 1239 times)
0 Members and 1 Guest are viewing this topic.
DavidHill
Senior Member
Posts: 142
handbrake lever set up on brake drums
«
on:
26 December, 2022, 04:29:33 PM »
Carrying on my saga of refitting the rear axle...i am struggling with the handbrake levers that sit up in between the brake back plate and the differential casing. I had to remove all of the brake mechanism, including the back plate to get at the levers so i could reposition them on top of the transverse spring. Having done that i reattached the back plate and the handbrake mechanism that sits inside the drum and acts on the shoes and then refitted the shoes and then the drum. I now find that the handbrake levers are very hard to move forward towards the front of the car to attach the handbrake cable to... do i need to "preload" the levers (as shown in Simons photo where they are kept stretched out with green rope) before then refitting the back plate etc?
handbrake.jpg
(322.54 KB, 1280x960 - viewed 135 times.)
Logged
DavidHill
Senior Member
Posts: 142
Re: handbrake lever set up on brake drums
«
Reply #1 on:
28 December, 2022, 06:51:13 PM »
After some experimentation today, I have answered my own question...yes you do have to pre tension the handbrake levers before then fitting the brake drums and shoes. essentially the rod coming down the back of the back plate should be vertical when the back plate and rod that actuates the brake shoe is attached. which means it needs to be pretensioned against the spring.
Logged
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> About the LMC Forum
=> General Chat
=> Press/Media: Lancias mentioned, seen or wanted!
=> Competition Information
=> Events 2024
=> Events 2025
=> Local Events
=> LMC Legends
=> Links
-----------------------------
Model Technical and Interest
-----------------------------
=> Pre-Lambda
=> Lambda
=> DiLambda
=> Artena and Astura
=> Augusta
=> Aprilia, Ardennes and Ardea
=> Aurelia
=> Appia
=> Flaminia
=> Flavia
=> Fulvia
=> Stratos
=> Beta and Montecarlo
=> Gamma
=> Delta and Prisma
=> Dedra, Thema and Delta (2nd series)
=> Ypsilon, Musa and Y10
=> Kappa
=> Thesis
=> Delta (2008-)
=> Commercial Vehicles
=> Other Lancia Models
-----------------------------
Buy, Sell and Search
-----------------------------
=> Members' cars for sale
=> Lancia vehicles for sale
=> Lancia vehicles required
=> Spares for sale
=> Spares required
-----------------------------
Events Archive
-----------------------------
=> Events 2011
=> Events 2012
=> Events 2013
=> Events 2014
=> Events 2015
=> Events 2016
=> Events 2017
=> Events 2018
=> Events 2019
=> Events 2020
=> Events 2021
=> Events 2022
=> Events 2023
Loading...