Lancia Motor Club Forum Banner
02 November, 2024, 09:14:14 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: S1 rev counter  (Read 1719 times)
0 Members and 1 Guest are viewing this topic.
ColinRob
Lapsed
Member
**
Posts: 10


« on: 16 September, 2022, 03:47:54 PM »

The rev counter on my 65 Fulvia is not working; today I spent some time on it with the thought of fitting a replacement cable, however, although I can remove the distributor end of the existing one I have been unable to remove the rev counter end - I had thought these just push into the instrument or am I wrong about that?

I had been plannng to remove the dash pad and the wooden fascia panel to access the instruments but have stalled on that because the dash pad refuses to come free and I am concerned I might break it as it seems rather fragile. I have removed some lower parts of the dash and can acces the rev counter cable and unscrew it by hand but it will not come free of the instrument.

Any comments or ideas please?

Thanks
Logged
Richard Fridd
Permanent resident
**
Posts: 3484



« Reply #1 on: 16 September, 2022, 04:35:40 PM »

Threaded collar and squared off push in bowden cable both ends?
The cable on the gearbox end was not connecting properley with the output drive when I had a similar s1 Fulvia tacho not working. 
If I have a spare tacho in my instrument stock, I can have a check and post a photo.
Richard
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
ColinRob
Lapsed
Member
**
Posts: 10


« Reply #2 on: 16 September, 2022, 08:13:54 PM »

threaded collar and push in is certainly describes the spare cable I have, will try again tomorrow. any photos welcome, thanks!
Logged
Richard Fridd
Permanent resident
**
Posts: 3484



« Reply #3 on: 17 September, 2022, 08:30:44 AM »

Photo of both mechanical and electronic types.


* Screenshot_20220917-090911.png (1405.74 KB, 1280x720 - viewed 114 times.)

* Screenshot_20220917-090906.png (1311.8 KB, 1280x720 - viewed 109 times.)

* Screenshot_20220917-090915.png (1304.98 KB, 1280x720 - viewed 107 times.)
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
ColinRob
Lapsed
Member
**
Posts: 10


« Reply #4 on: 18 September, 2022, 07:35:44 PM »

thanks

my rev counter is the type on the righ so a mechanical one
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.061 seconds with 21 queries.