Lancia Motor Club Forum Banner
28 April, 2024, 08:45:08 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Lancia Motor Club > Model Technical and Interest > Flavia > Water pump housing anyone?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Water pump housing anyone?  (Read 1570 times)
0 Members and 1 Guest are viewing this topic.
Caracad
Senior Member
*****
Posts: 123
« on: 18 August, 2022, 06:44:31 PM »
Spigots on mine are badly corroded.
Logged
bobhenry999
Megaposter
*
Posts: 347
« Reply #1 on: 19 August, 2022, 02:38:38 PM »
I got a good used one from Omicron a couple of years ago from my Coupe so it might be worth giving Andrew or Tristan a call.

Bob
Logged
Flavia 815 Vignale
Flavia 819 Milleotto
Flavia 815 Coupe Inezione
2000HF x2
2000 Coupe
2000 Sedan x3
Current 815 Coupe Variante 1005
BlueKSO
Member
****
Posts: 54

63 Flavia Coupe
« Reply #2 on: 26 August, 2022, 01:28:42 PM »
What model number Flavia. The earlier 815 is different from the 819. 

I know the whereabouts of a housing from an 819, because I had the water pump for my 815 !


Cheers,  Peter
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 4912
« Reply #3 on: 26 August, 2022, 04:36:57 PM »
Quote from: BlueKSO on 26 August, 2022, 01:28:42 PM
What model number Flavia. The earlier 815 is different from the 819. 

I know the whereabouts of a housing from an 819, because I had the water pump for my 815 !


Cheers,  Peter
Sorry Peter but the 819 housing went to Australia!!!
Logged
Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Running Board
Senior Member
*****
Posts: 136
« Reply #4 on: 27 August, 2022, 07:27:01 AM »
I might have one , will have a look over the weekend
Logged
When it comes to Lancias, mine are State Of The Ark!
Caracad
Senior Member
*****
Posts: 123
« Reply #5 on: 29 August, 2022, 07:47:53 AM »
Thanks for the replies everyone.
My car is a Kugelfischer 2000 coupe. Pump is the same as the earlier 1500/1800 Kugelfischer cars.
I have managed to repair my pump housing. Found that 22mm copper pipe fitted nice and tightly into one spigot. I used epoxy adhesive to fix and seal it. The other spigot was okay with a clean up and repair with same adhesive.

I then found that the thermostat housing was even worse.
Have also made a temporary repair so that I can use the car while the weather is good.
Longer term I want to replace both housings when I can find replacements.

* 7B6BF525-F2FA-48E6-8D45-BBCAFDDC1C6E.jpeg (3321.56 KB, 4032x3024 - viewed 60 times.)
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.084 seconds with 20 queries.