Lancia Motor Club Forum Banner
13 October, 2024, 11:44:31 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Engine Stabilising Arm Setting  (Read 1662 times)
0 Members and 1 Guest are viewing this topic.
Barry.Cook
Member
**
Posts: 22



« on: 25 May, 2022, 06:18:48 AM »

Hi,
    Could anyone tell me what the gap should be between the subframe and the stabilising arm on the righthand side of the engine? The car is a 1600HF.
Many thanks,
                    Barry
Logged

Cars Owned
1972 Fulvia 1600 HF Lusso
1966 Triumph TR4a
lancialulu
Press Officer
Permanent resident
*****
Posts: 5021



« Reply #1 on: 25 May, 2022, 06:31:02 AM »

Make sure the rubber pad is still there. I always set to touching. Also check the welding has not cracked either at the plate or adjuster. If it cannot be adjusted maybe the exhaust side engine mounts are worn.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Barry.Cook
Member
**
Posts: 22



« Reply #2 on: 25 May, 2022, 08:05:18 AM »

Thank you for such a swift response. The rubber is still there and there is sufficient adjustment so I will now set it as you suggest.

Regards,
             Barry
Logged

Cars Owned
1972 Fulvia 1600 HF Lusso
1966 Triumph TR4a
nistri
Megaposter
*
Posts: 558


« Reply #3 on: 31 May, 2022, 06:51:09 AM »

The Lancia manual says 2 mm clearance, Andrea
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.056 seconds with 21 queries.