Lancia Motor Club Forum Banner
04 November, 2024, 08:22:45 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Shock absorbers  (Read 3021 times)
0 Members and 1 Guest are viewing this topic.
Wangler
Megaposter
*
Posts: 303


« on: 26 April, 2022, 12:59:29 PM »


I have a dilemma. I have no reason to think that the shock absorbers on my Fulvia s3 are anything other than the original ones. They certainly look old and the gaiters are perished. That said, they seem to work perfectly well and they don’t seem to have any obvious signs that they’re not doing their job properly. 

Common sense however tells me that ancient shock absorbers cannot be working anywhere near their best, so I’m considering buying a new set. Is my logic is flawed?

Any thoughts appreciated. Thanks.
Logged

Fulvia Coupe 1976
Fulvia Coupe 3 1975
lancialulu
Press Officer
Permanent resident
*****
Posts: 5032



« Reply #1 on: 26 April, 2022, 01:24:58 PM »

Somewhat provocatively if it aint broke dont fix it. If you decide to replace then Fulvias really seem to work best in street mode with DeCarbons which you cannot really get anymore (save from vivalancia.com who make a unit with the decarbon design.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Wangler
Megaposter
*
Posts: 303


« Reply #2 on: 26 April, 2022, 01:47:39 PM »

Okay thank you. Although I am a believer in that motto I guess I’m always after an excuse to tinker with something or buy a nice new component!
Logged

Fulvia Coupe 1976
Fulvia Coupe 3 1975
Kaha
Member
***
Posts: 26


« Reply #3 on: 26 April, 2022, 06:54:42 PM »

I think the original deCarbons can be restored.
(At least the ones in the Flaminia could be restored)
Logged
Wangler
Megaposter
*
Posts: 303


« Reply #4 on: 26 April, 2022, 07:07:14 PM »

Thanks that’s a good idea. I’ll see what Omicron says but it could present some logistical problems. I don’t think working on the units sounds like a job I could undertake.
Logged

Fulvia Coupe 1976
Fulvia Coupe 3 1975
lancialulu
Press Officer
Permanent resident
*****
Posts: 5032



« Reply #5 on: 26 April, 2022, 08:21:13 PM »

I think the original deCarbons can be restored.
(At least the ones in the Flaminia could be restored)
To be honest I have never heard that Fulvia deCarbons could be/ were ever restored ??
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Kaha
Member
***
Posts: 26


« Reply #6 on: 27 April, 2022, 07:56:55 AM »

I think the original deCarbons can be restored.
(At least the ones in the Flaminia could be restored)
To be honest I have never heard that Fulvia deCarbons could be/ were ever restored ??

My local shock absorber workshop was a bit sceptical when I asked them to restore the Flaminia ones.
They were a bit afraid of availability of mainly gaskets, turned out they could use Koni gaskets.
Logged
Running Board
Senior Member
*****
Posts: 141



« Reply #7 on: 27 April, 2022, 03:59:53 PM »

I've always used Koni classics on Fulvia's , not harsh like spax , very similar to decarbon when set about half way
Logged

When it comes to Lancias, mine are State Of The Ark!
Wangler
Megaposter
*
Posts: 303


« Reply #8 on: 27 April, 2022, 06:02:00 PM »

Yes, Omicron use Koni. I was going to buy some relatively inexpensive ones from Historic Racing in Germany.  Looks like I might have to raid the piggy bank now though 😥
Logged

Fulvia Coupe 1976
Fulvia Coupe 3 1975
Jaydub
Megaposter
*
Posts: 346


« Reply #9 on: 28 April, 2022, 11:41:50 AM »

AVO UK based in Northampton sell dampers( shock Absorbers ) for Fulvias I believe. Worth a phone call. We use them on race cars and they work very well, and are adjustable. Tel. 01604 708101.
I have no connection to them other than as a customer.
Logged

1600 HF. S2.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.037 seconds with 21 queries.