Lancia Motor Club Forum Banner
08 October, 2024, 04:16:12 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Series 2 Engine Support  (Read 3223 times)
0 Members and 1 Guest are viewing this topic.
V8estate
Member
*
Posts: 6


« on: 14 January, 2022, 02:56:11 PM »

Hi
My engine support is missing. I have seen this which I am going to purchase.
I wanted to know if there is anything that fits on the subframe,( rubber bush for example ) or is this the complete support
thanks in advance


* enginesupport.jpg (37.7 KB, 640x480 - viewed 427 times.)
Logged
nistri
Megaposter
*
Posts: 558


« Reply #1 on: 14 January, 2022, 03:42:07 PM »

It also needs a nut to lock it on the sidearm. The manuela says the clearance from the subframe should be about 2 mm, Andrea
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
V8estate
Member
*
Posts: 6


« Reply #2 on: 14 January, 2022, 04:24:44 PM »

Thank you. So there is nothing that fits on the subframe?
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5020



« Reply #3 on: 14 January, 2022, 04:33:34 PM »

Not on Series 2 - assume you have the arm that bolts from  the crankcase below the alternator?

I may have a  new old stock item. PM me if  interested.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
V8estate
Member
*
Posts: 6


« Reply #4 on: 14 January, 2022, 04:39:54 PM »

Hi
Yes I have the arm. I also have the threaded support but it has no rubber on the end, so need a new one of these.
If you have one, I would be interested as I was going to buy one from Italy
Thanks
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5020



« Reply #5 on: 14 January, 2022, 04:54:05 PM »

it has no rubber on the end,

Relatively easy to find some thick rubber (4-5mm) and bond it with superglue....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
V8estate
Member
*
Posts: 6


« Reply #6 on: 14 January, 2022, 05:50:01 PM »

Yes, I thought that as i was writing my reply to you!
Logged
Richard Fridd
Permanent resident
**
Posts: 3478



« Reply #7 on: 14 January, 2022, 05:52:42 PM »

Thank you. So there is nothing that fits on the subframe?
                       s1 has a subframe mounting I think
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
Wangler
Megaposter
*
Posts: 300


« Reply #8 on: 14 January, 2022, 10:07:56 PM »

Mine didn’t have the rubber buffer on it so I used a cotton reel type exhaust mount and cut a section of it out using an electric drill to spin it and a stationary hacksaw blade to cut it. Use flexible glue to stick the resulting pad on to the screwed unit.
Logged

Fulvia Coupe 1976
Fulvia Coupe 3 1975
fay66
Permanent resident
**
Posts: 6222



« Reply #9 on: 16 January, 2022, 08:51:38 PM »

Yesterday I inspected an ex Italian ex South African series 1 1.3 Rally S or dating purposes..
The engine steady was bolted to the subframe, different to the one referred here, with the rubber pad, the same as on my 2c.
And casting my mind back over 20 years ago, I seem to remember the one on my 1969 RHD UK 1 3 Rallye Coupe was the same.
Brian
8227
 Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.056 seconds with 21 queries.