Lancia Motor Club Forum Banner
29 March, 2024, 03:02:53 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: steering column spring fulvia series 3  (Read 1026 times)
0 Members and 1 Guest are viewing this topic.
Oliveoils
Member
**
Posts: 17


« on: 01 October, 2021, 06:04:18 PM »

Hi Guys
Got a strange issue with steering. Everthing seems in good order , but....  dismantling the column revealed that there is a spring at the base which loads the bottom taper  bearing in the column and this is broken! The bearing is fine but without being loaded by the spring it is making the steering sloppy. This is not an off the shelf part, and I have been told it rarely if ever fails, so I need to track down a replacement.
Has anybody out there got one in there box's of bits, they would be prepared to sell in order to get me out of a fix?
I have attached a schematic of the steering from the manual and for guidence, and it is item 15 that is required.
Any help would be much appreciated
rgds
Terry


*  fulvia steering column schematic.jpg (1493.23 KB, 2016x1512 - viewed 111 times.)
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.081 seconds with 21 queries.