Lancia Motor Club Forum Banner
21 October, 2021, 03:10:08 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail, for Database Administrator e-mail      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail      -      To Join the club go to
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
Author Topic: Rear leaf springs for Flavia 2000 Coupe 1970  (Read 321 times)
0 Members and 1 Guest are viewing this topic.
Posts: 8

« on: 13 September, 2021, 10:36:17 PM »

I need replacement Rear leaf springs for my Flavia 2000 Coupe 1970. It seems my best hope for new replacements would be Midland Springs, but they are asking for a spring to use as a template. Mine are not suitable, as it looks to me as if a leaf or two leaves have been cut through to lower the car
  • , and the spring re-assembled and taped - so I can't trust the camber to be right, and they might not even have the right number of leaves.

I have found technical info, so can give Midland Springs the camber, the deflection under load, the 5 cm spring width, 30 mm eye I.D. But can any-one tell me the correct number of leaves [looks like 6 number in the Parts catalogue], and the thickness of each leaf? Or even better, lend me a spring for a template [I'll pay carriage and return of course]

Or recommend any-where else to get new built or OE spare or reasonable second-hand?

Many thanks, Mark I

PS * A later owner, to compensate, had added additional coil springs on top of the leaf springs. Not flat helper-springs, but coil-over springs that were far too stiff, giving a very high tail and a wobbly ride cornering. The up-side was that removal required only a gentle tug!
Posts: 12

« Reply #1 on: 19 September, 2021, 02:56:24 PM »

I've a '69 2000- I'll have a look in the next day or two & come back to you
Pages: [1]   Go Up
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.066 seconds with 21 queries.