Lancia Motor Club Forum Banner
19 October, 2021, 05:19:06 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail, for Database Administrator e-mail      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail      -      To Join the club go to
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
Author Topic: Engine support strut  (Read 263 times)
0 Members and 1 Guest are viewing this topic.
Posts: 27

« on: 14 August, 2021, 07:57:05 PM »

Hi guys

Iím trying to determine if the adjustable rubber pad on the end engine support bracket under the alternator is meant to be actually touching the subframe. I understand itís not meant to be constantly supporting any weight.

Iím guessing that itís there to stop the torque of the engine from turning it and the gearbox too much.

Posts: 395

« Reply #1 on: 15 August, 2021, 06:53:18 AM »

about 2 mm clearance recommended by the manual, Andrea

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
Posts: 27

« Reply #2 on: 15 August, 2021, 06:58:48 AM »

Thank you, thatís great. I trawled the manual but couldnít find this, but then itís not the easiest document to trawl through!
Pages: [1]   Go Up
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.047 seconds with 21 queries.