Lancia Motor Club Forum Banner
28 March, 2024, 06:52:24 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: S2 gearbox dipstick/filler  (Read 2297 times)
0 Members and 1 Guest are viewing this topic.
cbudden
Member
*
Posts: 6


« on: 21 July, 2021, 08:45:50 PM »

Hi,
Am looking for advice on the removal of the gearbox dipstick - my car is undergoing a major refresh after many years laid up and I had hoped to change the gearbox oil but have found it impossible to remove the dipstick - it appears to be plastic and am therefore nervous about using too much force. From the information in the handbook it implies it should just pull out - am I missing something? Does anyone have any suggestions on how to safely remove it or alternatively a way to change the oil that doesn’t involve the use of dipstick/filler hole?.
Many thanks
Chris
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #1 on: 21 July, 2021, 09:27:15 PM »

They are sometimes notoriously stiff/stuck, but a vertical tug should do it. Remember to drain the two compartments (2 drain plugs) but fill through the dipstick hole. Recommend Mobil SCh 1 75/90 fully synthetic
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
D5177_55A
Member
***
Posts: 33


« Reply #2 on: 21 July, 2021, 10:59:07 PM »

Is it caught on something when pulling vertical? Mine has a ‘cutout’ on the flange, that previous owners seem to have made – by force. It sometimes gets stuck and needs ‘unscrewing’ by twisting it.
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #3 on: 22 July, 2021, 08:34:23 AM »

Is it caught on something when pulling vertical? Mine has a ‘cutout’ on the flange, that previous owners seem to have made – by force. It sometimes gets stuck and needs ‘unscrewing’ by twisting it.
the dipsticks should all have a flat on one side. Not sure if this is to orient the tiny breather hole away from the top of the gearbox.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
D5177_55A
Member
***
Posts: 33


« Reply #4 on: 22 July, 2021, 10:09:12 AM »

Ahhh – not done by brute force then
Logged
cbudden
Member
*
Posts: 6


« Reply #5 on: 22 July, 2021, 12:41:22 PM »

Gentlemen,
Many thanks for the comments and support. I can confirm that I have finally (after 3 days of trying) managed to extract the dipstick. A fair amount of patience, an improvised tool to allow me to use ‘gentle’ hammer blows to exert vertical force and some sweat finally got it out. The recess into which it fitted was coated in that aluminium/alloy white corrosion which must have been binding the dipstick. It’s all clean now and am seeking out a new o-ring.
Thanks again
Chris
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.06 seconds with 21 queries.