Lancia Motor Club Forum Banner
13 November, 2024, 04:14:30 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Cylinder head dowel bolts  (Read 2850 times)
0 Members and 1 Guest are viewing this topic.
andyps
Megaposter
*
Posts: 331


« on: 19 July, 2021, 12:24:30 PM »

Does anyone know a source for the dowel bolts needed for fitting a cylinder head correctly - having got mine sorted-ish I am now aware of another issue for which I will be taking the head off again. The original bolts did not include the dowel bolts, I bought a new set from Pieces-Fulvia in France and they didn't include any. To ensure the head is more correctly fitted next time I would really like to get some but don't know a source. Alternatively if anyone has a paid they can lend to me whilst I fit the head that would be great.
Logged
jus
Senior Member
*****
Posts: 133



« Reply #1 on: 19 July, 2021, 05:43:27 PM »

Omicron?
Logged

1969 S1 Fulvia 1.6
1971 Ex-works Fulvia 1.6
1975 Gr4 Stratos HF
1982 Beta Spyder
1982 037 Rally

Recently passed: 1986 Delta S4
Long since passed: Delta HF Turbo ie, Delta HF Turbo (carb), Delta 1500.
andyps
Megaposter
*
Posts: 331


« Reply #2 on: 19 July, 2021, 10:32:40 PM »

I rang them today and asked but Andrew wasn't there - the person said they'd ask him when he got back but I haven't heard back so I'll email him.
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5039



« Reply #3 on: 20 July, 2021, 07:35:32 AM »

Its hardly a big deal. Your original bolts should have had 2 for #1 & #2 bolt holes. If you are bothered about it you can wind some metal adhesive tape round two bolts near the head to make a dowel effect to position the head and remove them (replaced with 10.9 or greater strength bolts after the head has had all the other bolts fitted and nipped by hand). Then I do 3 stages of torquing to 24ft lb. 10, 18, 24. If the gasket is the grey graphite type - assemble dry. Others will have other opinions!
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
andyps
Megaposter
*
Posts: 331


« Reply #4 on: 20 July, 2021, 09:11:33 AM »

Its hardly a big deal. Your original bolts should have had 2 for #1 & #2 bolt holes. If you are bothered about it you can wind some metal adhesive tape round two bolts near the head to make a dowel effect to position the head and remove them (replaced with 10.9 or greater strength bolts after the head has had all the other bolts fitted and nipped by hand). Then I do 3 stages of torquing to 24ft lb. 10, 18, 24. If the gasket is the grey graphite type - assemble dry. Others will have other opinions!

Thanks, my original bolts didn't have any dowel bolts and there weren't any in the replacement set I got. As people seem to have said it is important to use them I thought I should - I'll try the tape if I don't find any.
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5039



« Reply #5 on: 20 July, 2021, 11:20:47 AM »

For what it is worth it is only to align the head initially. when you have all the bolts in you will not find any slop in the position of the head. If they were important they would be in the kit.....or at least a message...
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.031 seconds with 21 queries.