Lancia Motor Club Forum Banner
28 March, 2024, 10:25:55 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: S2 Sump/Oil Pan  (Read 3643 times)
0 Members and 1 Guest are viewing this topic.
RDG496
Member
***
Posts: 46


« on: 06 May, 2021, 08:44:26 AM »

I may need to source a new sump, when we last changed the oil it seemed the current one had been welded at one point and the threads on the sump plug required pfte tape and some sealer.
It does not leak at all but I suspect at one point a replacement may be needed.

Used is the best/only option ??

Are all Pans the same on the 1.3 whether S1 2 or 3 ?

« Last Edit: 06 May, 2021, 11:56:44 AM by RDG496 » Logged
Jai Sharma
Megaposter
*
Posts: 461


« Reply #1 on: 06 May, 2021, 06:08:06 PM »

I think, but am not sure, that all the sump pans will fit.
There were a few that were a bit deeper, so presumably hold a bit more oil, I think these were on the very last cars but am not sure.
Logged
RDG496
Member
***
Posts: 46


« Reply #2 on: 06 May, 2021, 07:24:24 PM »

Thanks for coming back, I shall trawl the net....I'll find clarification somewhere !
Logged
Beckerman67
Member
****
Posts: 80



« Reply #3 on: 07 May, 2021, 07:05:58 AM »

 New one here https://www.ricambilanciafulvia.it/en/spare-parts-lubrification-system-lancia-fulvia/489-coppa-olio-fulvia-13.html
Logged
RDG496
Member
***
Posts: 46


« Reply #4 on: 07 May, 2021, 07:29:06 AM »

This is where I realise Fulvia ownership is not cheap
Eur 323
Also Front Wheel bearing, German Repro +140ish

Similar Alfa parts
GBP 135 and 24

I will source a used one I think, I can wait as its not leaking......yet !
Logged
Jaydub
Megaposter
*
Posts: 344


« Reply #5 on: 07 May, 2021, 09:34:00 AM »

I would get the threaded hole welded up, drilled and rethreaded. Not too difficult if you know a good aluminium welder/machine shop.
Logged

1600 HF. S2.
RDG496
Member
***
Posts: 46


« Reply #6 on: 07 May, 2021, 11:14:34 AM »

If I can find a used one at a decent price I will buy it, if not I'll find a local welder and go that route.

Either way the last resort will be paying GBP300+ that's for sure !
Logged
Jay
Megaposter
*
Posts: 422



« Reply #7 on: 07 May, 2021, 12:12:00 PM »

They do come up on ebay quite regularly
Logged

Julian Wood, Kingston, London
fay66
Permanent resident
**
Posts: 6189



« Reply #8 on: 07 May, 2021, 12:33:49 PM »

This is where I realise Fulvia ownership is not cheap
Eur 323
Also Front Wheel bearing, German Repro +140ish

Similar Alfa parts
GBP 135 and 24

I will source a used one I think, I can wait as its not leaking......yet !
Front wheel bearings have been selling for over £100 for at least the last 12+ years unless you were very lucky, but what a bearing , they make great door stops.
Brian
8227 : Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
Beckerman67
Member
****
Posts: 80



« Reply #9 on: 07 May, 2021, 06:27:37 PM »

 https://www.ebay.co.uk/itm/274782211011?hash=item3ffa4bcbc3:g:67wAAOSw2XZgV0Jp
Logged
davidwheeler
Permanent resident
**
Posts: 1469



« Reply #10 on: 10 May, 2021, 08:48:47 AM »

Helicoil.
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
RDG496
Member
***
Posts: 46


« Reply #11 on: 11 May, 2021, 11:37:45 AM »

Bought that one on Ebay, will clean it up and install it...job done (I hope)!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.056 seconds with 21 queries.