Lancia Motor Club Forum Banner
11 December, 2024, 09:11:48 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Brake pedal height. Coupe S1  (Read 2586 times)
0 Members and 1 Guest are viewing this topic.
simonpen
Lapsed
Senior Member
*****
Posts: 115


« on: 19 April, 2021, 02:03:05 PM »

I have recently bled the brakes on my S1. The car has a new master cylinder, new pipework, rebuilt servo and rebuilt callipers. The system is working but the point at which it works is very low in the pedal travel, say about 3-4 cms from the floor. Is this normal?
Logged

1969 Rallye 1.3S
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #1 on: 19 April, 2021, 02:39:23 PM »

No it is not. I had this on another S1 recently. Suspect was servo trapping air. Lots of synchronised bleeding seemed to get a better pedal in the end and it braked normally. Just driven another S1 without servo and pedal is normal distance i.e. braking starts near the top....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
simonpen
Lapsed
Senior Member
*****
Posts: 115


« Reply #2 on: 19 April, 2021, 05:49:12 PM »

Synchronised bleeding?
Logged

1969 Rallye 1.3S
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #3 on: 19 April, 2021, 08:26:51 PM »

Synchronised bleeding?

one pushing the pedal and one opening the bleed nipple ( with appropriate pipe and container attached). When pedal gies to floor shut the bleed nipple release the pedal slowly and repeat....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
davidwheeler
Permanent resident
**
Posts: 1485



« Reply #4 on: 20 April, 2021, 09:48:05 PM »

Get a vacuum bleeder kit from your local motor factor.   https://www.sealey.co.uk/product/5637204666/1l-pneumatic-vacuum-brake-bleeder is what I use (and it can be got cheaper than this I am sure).
If the brakes pump up then there is air in the system.  If not then check the length of the pedal to servo operating rod.  If that is OK then consider taking off the master cylinder and checking the length of the rod between the servo and the master cylinder piston.     There is a post (by me) early on in the technical information thread that may help.
« Last Edit: 20 April, 2021, 09:59:48 PM by davidwheeler » Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.11 seconds with 21 queries.