Lancia Motor Club Forum Banner
04 December, 2024, 09:19:56 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Lower Fulvia rear  (Read 6048 times)
0 Members and 1 Guest are viewing this topic.
Topher
Lapsed
Member

Posts: 4


« on: 07 February, 2021, 06:16:07 PM »

I love the look of my Fulvia but the rear ride height takes the edge off the side on view. Any ideas on how to drop it 40-50mm?
Logged
Richard Fridd
Permanent resident
**
Posts: 3487



« Reply #1 on: 07 February, 2021, 06:27:47 PM »

I have added a middle leaf upside down to two of my Fulvias. Worked well on road and track. The brake bias valve 'drop link' must be shortened to avoid rear wheel lockup under braking. Richard
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
Lightweight_911
Lapsed
Member
***
Posts: 30


« Reply #2 on: 07 February, 2021, 09:21:36 PM »

.

Has any work been carried out on the rear suspension in the recent past ?

If so, I'd check that the springs were correctly pre-loaded to the Factory's recommendation before the relevant fasteners were tightened.

When I got my current S1 coupe it was sitting very high at the back so I slackened everything off, put the rear up on axle stands & added 'ballast' to the boot (I used new bags of gravel) until there was a gap of 80mm between the spring plate & the bump stop rubber - in my case it took 5 x 25kg bags - then tightened all the fasteners to the recommended torque.

The car then looked (&, more importantly, drove) as it should !

.
Logged
Topher
Lapsed
Member

Posts: 4


« Reply #3 on: 08 February, 2021, 09:08:14 PM »

Can you give me some info on the extra leaf. Where would I get one and if it a Lancia one which one is it. Also I知 not sure how I would add to the existing leafs? Thanks.
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5051



« Reply #4 on: 08 February, 2021, 10:22:28 PM »

No extra leaf is necessary. Unless your springs have been re-tempered they just need setting correctly - slacken off all (every one) of the silent block mountings and compress the rear suspension with weight in the boot so there is a 80mm gap between the top of the rear spring plate and the bottom of the bump stop and then do them all up (the torques are high for the rear spring mounts). You may find they have not been done up tight at all....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
ChrisA
Lapsed
Member
**
Posts: 23


« Reply #5 on: 09 February, 2021, 08:55:07 AM »

As I hope to set my suspension as soon as the weather improves can someone tell me what the torque settings are for the rear spring of an S2?
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5051



« Reply #6 on: 09 February, 2021, 09:55:43 AM »

As I hope to set my suspension as soon as the weather improves can someone tell me what the torque settings are for the rear spring of an S2?
if you buy the cd from vivalancia.com its all there.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Topher
Lapsed
Member

Posts: 4


« Reply #7 on: 10 February, 2021, 01:13:23 PM »

I just sent off for the CD. Problem now is how to view a CD in 2021, I知 sure I値l find someone with an old pC with a CD reader 😉
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5051



« Reply #8 on: 10 February, 2021, 03:33:54 PM »

I just sent off for the CD. Problem now is how to view a CD in 2021, I知 sure I値l find someone with an old pC with a CD reader 😉
You could ask for a wetransfer file transfer......
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Jay
Megaposter
*
Posts: 440



« Reply #9 on: 10 February, 2021, 03:47:52 PM »

I purchased the Aprilia CD a couple of weeks ago from Huib (Viva-lancia) he gave me the option of CD or Wetransfer, received it the next day 
Logged

Julian Wood, Kingston, London
Topher
Lapsed
Member

Posts: 4


« Reply #10 on: 27 February, 2021, 08:05:15 PM »

Hi
I have the torque settings now, my problem is getting a socket to fit the clamp on the leaf springs, it痴 too tight for a normal socket to slide over the nut. Any suggestions? Also should I slacken the bolts before I put the ballast in the boot?
🙏
Logged
davidwheeler
Permanent resident
**
Posts: 1485



« Reply #11 on: 05 March, 2021, 12:48:37 PM »

AF or Imperial???  Or do you mean there is insufficient room in which case you will just have to use a ring spanner and pull hard!
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
lancialulu
Press Officer
Permanent resident
*****
Posts: 5051



« Reply #12 on: 05 March, 2021, 06:17:12 PM »

Hi
I have the torque settings now, my problem is getting a socket to fit the clamp on the leaf springs, it痴 too tight for a normal socket to slide over the nut. Any suggestions? Also should I slacken the bolts before I put the ballast in the boot?
🙏
slacken every bolt including shocks and panhard rod then torque everything after ballast.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.054 seconds with 21 queries.