Lancia Motor Club Forum Banner
11 December, 2024, 06:35:06 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Early Competition Fulvia HF  (Read 3373 times)
0 Members and 1 Guest are viewing this topic.
Gedwardes
Member

Posts: 2


« on: 31 October, 2020, 09:00:01 PM »

Hi there,

Been doing a lot of research into the early competition history of the 1.2 and 1.3 HF that raced in ETCC Group 2, Targa Florio, Nurburgring etc from 1966 to 1969. Looking through a lot of old photos, the fuel filler flap has been moved up from the right rear quatre panel to on top of the shoulder. However on the FIA Homologation forms it shows the car with the traditional fuel flap position.

Does anyone have an answer to why they did this? Was it purely to speed up fuel stops by increasing the flow into the tank and I’m guessing that it was a simple cut and shut in the workshops!


* 5933F70A-291B-4294-8D33-CF64CD59B097.jpeg (118.32 KB, 640x454 - viewed 592 times.)
« Last Edit: 31 October, 2020, 09:02:44 PM by Gedwardes » Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #1 on: 31 October, 2020, 09:13:50 PM »

My works 1.3HF has this flap. Definitely works spec before they went higher onto the top of the wing with the Monza style. In the boot is a 60 or 80 litre tank. The normal tank is deleted. The standard flap position would be too low for the internal tank.
« Last Edit: 31 October, 2020, 09:17:31 PM by lancialulu » Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Gedwardes
Member

Posts: 2


« Reply #2 on: 31 October, 2020, 10:15:04 PM »

Great, thanks for info! Makes a lot of sense. I guess these were separate fabricated aluminium tanks with the original tank hole blanked over in the boot floor.
« Last Edit: 01 November, 2020, 12:29:20 AM by Gedwardes » Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #3 on: 31 October, 2020, 10:17:52 PM »

I believe they used the top pressing of the original tank to blank the hole in the boot.

The internal tank reduces the polar moment of the car as it was nearer the centre....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
nthomas1
Rebel Poster
*
Posts: 860



« Reply #4 on: 31 October, 2020, 10:51:50 PM »

The Altorio book shows the flap in the higher position on page 166.  The text is in Italian. Pages 206 and 207 tell the story of the adoption of the Monza type filler.  Picture courtesy of Giorgio Nada Editore s.r.l.


* IMG_1136.JPG (479.31 KB, 1355x1156 - viewed 288 times.)
« Last Edit: 31 October, 2020, 11:05:15 PM by nthomas1 » Logged

Norm Thomas
Ormskirk, Lancashire

Own:
1973 Fulvia S2 Coupe
Previous Lancias: S2 Coupe and S3 Coupe in late 1970s
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.04 seconds with 20 queries.