Aurelia B20 2.5l cylinder heads for sale + rear outer drive shafts

[chriswgawne]

It looks as if I am going to be in the UK for a few weeks from early November so a good opportunity to move some more unwanted surplus parts on.
In Sunningdale I have a pair of used B20 2.5l heads in good condition with no visible corrosion. They from engine B20 3941 which is 4th series I believe and have been planed during their life however they are very useable.
I also have another 2.5l B20 head stamped B20 0012 which looks as if it has been hardly used if at all. It has never been planed and is in excellent condition.
And finally I have a pair of outer  B20 rear drive shafts - that's the shaft from the splined coupling to the outside u/j. These have new needle rollers and rubber seals and the splines are in very good condition.

I will post photos of all the above in a couple of days.
If these are unsold when I return to the UK in early November I will be also be listing their details on ebay.
Chris

[chriswgawne]

Here are a couple of photos of the rear drive shafts. If necessary I can supply with the 'blocks' which bolt to the hub with new rubber seals and needle rollers.
No reasonable offer refused.
Chris 

[chriswgawne]

Ooops. Photo files too big. Here they are again.

[chriswgawne]

Here are a couple of photos of cylinder head 'a' from 3941

[chriswgawne]

And a couple from cylinder head 'b'

[chriswgawne]

And now a few photos of cylinder head from 0012 which is almost like new!

[chriswgawne]

The drive shafts referred to above are sold but to my slight surprise the cylinder heads are still available in Sunningdale.

I cant see that Aurelia cylinder heads will ever be re-manufactured....and if they are, at what price? All 3 heads shown above have little if no corrosion which is becoming a real problem these days as they approach 70 years old and the pair of used heads from engine B20 3941 have plenty of life left in them. These heads will fit all series of 2.5l B20s.

The single hardly used (if ever?) head stamped B20 0012 which is shown in the final 4 photos above is £1,650 and the pair of used 2.5l heads in the earlier photos above are £2,600 for the two.
Chris

[chriswgawne]

It looks as if I will be returning to Italy towards the end of May so this is just a reminder that the 3 cylinder heads mentioned above here in Sunningdale are still available.
I still have a small quantity of other good Aurelia parts available here which I would ideally like to see go before the end of May.
I will list these separately once I have double checked them this evening.
Chris

[chriswgawne]

To my ongoing surprise these Aurelia 2.5l cylinder heads have not sold either here or on ebay.co.uk .
I have a plan to return to Italy this coming Friday and I am fairly certain I will be taking them with me as they will surely sell there?
Chris