Lancia Motor Club Forum Banner
11 December, 2024, 03:18:45 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Series 1 Coupe - Master Cylinder ports?  (Read 3158 times)
0 Members and 1 Guest are viewing this topic.
Fulvia67
Lapsed
Member

Posts: 4


« on: 14 October, 2020, 03:38:46 PM »

Hi - after several years on the 'shelf' our Series 1 coupe rebuild is finally progressing. All sheet metal is complete, base coat painted and chassis and electrical re assembly well under way.
However, I am struggling with the brakes, and hoping to get some advice. Specifically with the Brake Master Cylinder now finally rebuilt and installation of the brake pipes nearly complete I would greatly appreciate confirmation of the porting at the master cylinder - its a non servo RHD car. There are two side ports - can anyone confirm which one is for the front brakes (split L and R via a double banjo) and which to the rear?
Any advice would be most welcome.
Logged
nistri
Megaposter
*
Posts: 564


« Reply #1 on: 15 October, 2020, 08:13:30 AM »

Please see scheme from factory parts book, Andrea


* S1 non-servo brake connections.jpg (299.88 KB, 1600x1191 - viewed 246 times.)

* S1 non-servo brake connections.jpg (299.88 KB, 1600x1191 - viewed 266 times.)
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
Fulvia67
Lapsed
Member

Posts: 4


« Reply #2 on: 15 October, 2020, 12:40:36 PM »

Thank you Andrea, I had looked at the factory part book, and now happy to have your advice that it does apply to my 818.331 Fulvia Coupe Rallye 1.3
Tim
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #3 on: 15 October, 2020, 03:04:46 PM »

Thank you Andrea, I had looked at the factory part book, and now happy to have your advice that it does apply to my 818.331 Fulvia Coupe Rallye 1.3
Tim
If you have remote servo then this is the other plumbing page. Bear in mind differences twixt RHD and LHD


* IMG_20201015_160141073.jpg (815.2 KB, 4160x2340 - viewed 256 times.)
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
nistri
Megaposter
*
Posts: 564


« Reply #4 on: 15 October, 2020, 03:24:56 PM »

Unless your car has been modified, the scheme applies also to the 330/331 rallye. Andrea
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
lancialulu
Press Officer
Permanent resident
*****
Posts: 5054



« Reply #5 on: 15 October, 2020, 04:05:56 PM »

Thank you Andrea, I had looked at the factory part book, and now happy to have your advice that it does apply to my 818.331 Fulvia Coupe Rallye 1.3
Tim
If you have remote servo then this is the other plumbing page. Bear in mind differences twixt RHD and LHD
I should have read the first post correctly - please ignore this as you have stated non servo car....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.064 seconds with 21 queries.