Lancia Motor Club Forum Banner
04 December, 2024, 09:44:19 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Halda Twinmaster  (Read 2077 times)
0 Members and 1 Guest are viewing this topic.
jus
Senior Member
*****
Posts: 133



« on: 10 October, 2020, 11:34:54 PM »

Hi. Looking to put a Twinmaster in the Fulvia - and wondering if anyone knows which T-piece I need?
Thanks,
Justin.
Logged

1969 S1 Fulvia 1.6
1971 Ex-works Fulvia 1.6
1975 Gr4 Stratos HF
1982 Beta Spyder
1982 037 Rally

Recently passed: 1986 Delta S4
Long since passed: Delta HF Turbo ie, Delta HF Turbo (carb), Delta 1500.
SanRemo78
Rebel Poster
*
Posts: 838



« Reply #1 on: 11 October, 2020, 02:38:31 PM »

Depends where you want to install it? I've got a Tripmaster in the Stratos replica, it uses an 8:1 T piece that fits directly onto the back of the speedometer with the drive cable plugged into the back to the T. This is an example but I'm not saying buy this one!

https://www.ebay.co.uk/itm/Halda-T-piece/264762753941?hash=item3da5170395:g:uMkAAOSwaKZe5P7S

The seller seems to have a few so if you can identify the thread size/pitch on the back of your speedometer and he can match it then it's plug and play with a couple of caveats! The cable may rotate in the wrong direction in which case you dismantle the T piece and put the output drive into the other side of the casing. Secondly, you'll need to calibrate the Twinmaster with the right set of drive wheels.

Alternatively, you can send your existing speedometer cable to Speedy Cables with Halo T piece and an instruction where you want to fit the T piece and they'l make you up a long and short cable with the T piece in the middle.

The works Stratos also used Tripmasters/Twinmasters but in these installations the drive was taken from the front wheel with a threaded boss on the back of the stub axle which was drilled through it's length so that the cable drive appeared on the outer end and was driven using a square hole in the grease cap!

Guy
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5050



« Reply #2 on: 11 October, 2020, 02:50:23 PM »

Speak to Clive at Autochron

http://www.autochron.co.uk/

Encourage him to rejoin LMC.....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.059 seconds with 21 queries.