8.32 fuel pressure regulator

[m tulloch]

Does anyone have any details on the fuel pressure regulator connections on a series 2 8.32, specifically whether there is a vacuum connection onto the plenum? The regulator on mine has a small rubber tube approx. 30mm long which I would have expected to connect to the plenum but it isn't connected to anything.
I have a workshop manual but unhelpfully it is for the series 1 which has a different set up for the plenum connections.

Thanks.

[iom100]

I have a Ser 1 and the connections from the Fuel Pressure Sensor are as you describe - there is a short tube capped that goes nowhere.

FYI - Mine has become faulty, if the engine doesnt fire the first time the the regulator sticks and you have to wait an hour or tap it with a hammer !! and they are a fortune - but i am going to bite the bullet and get a new one.