Lancia Motor Club Forum Banner
04 December, 2024, 12:51:53 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Coolant Hoses  (Read 2801 times)
0 Members and 1 Guest are viewing this topic.
my69S1
Lapsed
Member
****
Posts: 92


« on: 21 September, 2020, 12:47:52 PM »

Did the coolant hoses change length from the S1 to the S2? 

I ordered new top and bottom rad hoses for my S1 and both of them are longer than the ones on the car currently.  The bottom one is especially longer, by about 10cm.  Am I suppose to cut them to fit?  I haven't heard back from the supplier but they sell the same hoses for all models of the Fulvia.  I can post pictures if that helps.
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5050



« Reply #1 on: 21 September, 2020, 04:18:31 PM »

You have to generally trim them. Just a little..... or they will be too short. Are they silicon? If so use a very sharp blade and dont go off line
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
my69S1
Lapsed
Member
****
Posts: 92


« Reply #2 on: 22 September, 2020, 12:42:02 PM »

Here is a picture of the lower hose.  It has the correct bend but is considerably longer than mine.  Or maybe something is wonky on my car?



* DSCN7396.JPG (229.74 KB, 1024x768 - viewed 279 times.)

* DSCN7395.JPG (223.32 KB, 1024x768 - viewed 289 times.)
Logged
Jaydub
Megaposter
*
Posts: 346


« Reply #3 on: 22 September, 2020, 04:27:21 PM »

If the bend is correct, just carefully cut off the excess as Tim suggested.
Logged

1600 HF. S2.
rogerelias
Rebel Poster
*
Posts: 955


MY 1600HF IN HEARTBEAT GARAGE


« Reply #4 on: 22 September, 2020, 07:06:18 PM »

New one does not look right to me ,when placed alongside the one fitted to the car, it looks like the new hose does not run straight as it should do, it looks like it's veering off, so when cut and fitted may end up with a kink in it.
Logged

FULVIA 1600HF LUSSO
1958 VELOCETTE MAC
Triumph Bonneville t120v 1972
1968 MGC ROADSTER
1958 Series 2 Appia berlina
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.347 seconds with 21 queries.