impaw
Megaposter
Posts: 216
|
|
« on: 20 July, 2020, 04:32:18 PM » |
|
Hello,
I suspect the tube that the steering box attaches to, has been replaced with a with a slightly fatter tube, as I have difficulty fitting the steering box to the tube. My tube is 36 / 35,8 mm in diameter. Can anybody confirm this diameter?
Thank you!
Torstein
|
|
|
Logged
|
Torstein
1955 Aurelia B20 1966 Fulvia 1966 Fulvia rally/race car
|
|
|
impaw
Megaposter
Posts: 216
|
|
« Reply #1 on: 21 July, 2020, 02:31:14 PM » |
|
Diameter confirmed!
Does the steering box usually need a lit of force to fit over the tube?
|
|
|
Logged
|
Torstein
1955 Aurelia B20 1966 Fulvia 1966 Fulvia rally/race car
|
|
|
chriswgawne
Permanent resident
Posts: 2082
|
|
« Reply #2 on: 21 July, 2020, 03:04:29 PM » |
|
I would have said the tube diameter should be 35mm by the way Torstein. This is from measuring a complete rebuilt steering box and clamp on the bench. There should be no force necessary to place it in the correct position as neither the steering box or the steering box clamp is a complete semi circle. Has there been metalwork in this area? The metal under the tube is often very corroded needing replacing and the shape and position of the aperture relative to the cross tube for mounting the steering box is quite critical. Chris
|
|
|
Logged
|
Chris Gawne Mobile: 07778 216552
|
|
|
impaw
Megaposter
Posts: 216
|
|
« Reply #3 on: 21 July, 2020, 03:51:30 PM » |
|
I removed some undercoating etc and got 35,3mm so you are right Chris, 35 is the correct number.
Is this the correct steering box?
|
|
|
Logged
|
Torstein
1955 Aurelia B20 1966 Fulvia 1966 Fulvia rally/race car
|
|
|
impaw
Megaposter
Posts: 216
|
|
« Reply #4 on: 21 July, 2020, 03:58:12 PM » |
|
...and yes, there might have been repairs in this area
|
|
|
Logged
|
Torstein
1955 Aurelia B20 1966 Fulvia 1966 Fulvia rally/race car
|
|
|
chriswgawne
Permanent resident
Posts: 2082
|
|
« Reply #5 on: 21 July, 2020, 05:14:49 PM » |
|
Is there no 'lancia' identification plate on the upper side of the box? I have never seen one with cross headed screws before. Chris
|
|
|
Logged
|
Chris Gawne Mobile: 07778 216552
|
|
|
chriswgawne
Permanent resident
Posts: 2082
|
|
« Reply #6 on: 21 July, 2020, 05:29:35 PM » |
|
Here is a rebuilt rhd B20 steering box+ clamp bracket number 2065 Chris
|
|
|
Logged
|
Chris Gawne Mobile: 07778 216552
|
|
|
impaw
Megaposter
Posts: 216
|
|
« Reply #7 on: 21 July, 2020, 05:48:59 PM » |
|
Thank you for replying, No Lancia markings, the only markings on the box is " C10 15017" Dammit, doesnt look promising
|
|
|
Logged
|
Torstein
1955 Aurelia B20 1966 Fulvia 1966 Fulvia rally/race car
|
|
|
impaw
Megaposter
Posts: 216
|
|
« Reply #8 on: 21 July, 2020, 05:57:02 PM » |
|
another marking, on the bracket. Something that looks like a logo, a circled "T" then: " C.10 - 60023"
|
|
|
Logged
|
Torstein
1955 Aurelia B20 1966 Fulvia 1966 Fulvia rally/race car
|
|
|
Sliding Pillar
Permanent resident
Posts: 1719
|
|
« Reply #9 on: 21 July, 2020, 07:47:30 PM » |
|
C10, isn't that an Appia number?
|
|
|
Logged
|
1955 Aurelia 1961 Lamborghini
|
|
|
impaw
Megaposter
Posts: 216
|
|
« Reply #10 on: 21 July, 2020, 08:26:13 PM » |
|
C10, isn't that an Appia number?
That makes sense, and would explain the fitment issues. The box seemed too small for the tube, and I would guess the crossmember tube on an Appia is of a smaller dimension than on the Aurelia
|
|
|
Logged
|
Torstein
1955 Aurelia B20 1966 Fulvia 1966 Fulvia rally/race car
|
|
|
impaw
Megaposter
Posts: 216
|
|
« Reply #11 on: 21 July, 2020, 08:45:10 PM » |
|
Google confirms, it is indeed an Appia steering box. Good thinking Ade!
|
|
|
Logged
|
Torstein
1955 Aurelia B20 1966 Fulvia 1966 Fulvia rally/race car
|
|
|
|