Lancia Motor Club Forum Banner
14 November, 2024, 07:38:13 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Aprilia Oil Filter  (Read 7406 times)
0 Members and 1 Guest are viewing this topic.
peterblenk
Member
****
Posts: 57


« on: 20 June, 2020, 09:45:04 AM »

Has anyone found a way to replace the original blade-type "filter" with a replaceable cartridge? I am thinking of making a new cap to the oil filter cavity, in which to fit a more modern cartridge. Or perhaps someone has fitted a full flow system, using a modern cartridge? Peter
Logged
simonandjuliet
Permanent resident
**
Posts: 2550



« Reply #1 on: 20 June, 2020, 09:57:09 AM »

Peter, I have sent you a message - I can't post it here because I don't "own" the photos !
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia, 2xArdea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20s4,R4 Sinpar, R4 Rodeo, 65 Moke, 3xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole,LR Defender, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan
davidwheeler
Permanent resident
**
Posts: 1483



« Reply #2 on: 21 June, 2020, 06:28:44 PM »

Please send me one too!
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
Raahauge
Senior Member
*****
Posts: 135


« Reply #3 on: 21 June, 2020, 08:20:47 PM »

Simon, very correct of you about the photos but please share them with whoever may be interested.
I have done my machining but will gladly provide a sketch and the other details of what I have done.
Mike
Logged
simonandjuliet
Permanent resident
**
Posts: 2550



« Reply #4 on: 22 June, 2020, 05:56:53 AM »

Thanks Mike, I will share the photos with David
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia, 2xArdea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20s4,R4 Sinpar, R4 Rodeo, 65 Moke, 3xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole,LR Defender, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan
brian
Megaposter
*
Posts: 289


« Reply #5 on: 22 June, 2020, 08:04:32 AM »

Several of us have done an adaptation for the Augusta which uses a Renault 5 filter on an aluminium intermediary mount and I had wondered if this was the same as on the Aprilia as my vaned original has no actuating rods. I have not got round to examining the parts diagrams to see if is do-able.
Logged

Brian Hands


1922 Hands Tourer
1934 Augusta standard saloon
1938 Aprilia S1 saloon
1953 Aurelia B10
1965 Flavia Sport
davidwheeler
Permanent resident
**
Posts: 1483



« Reply #6 on: 24 June, 2020, 08:21:56 AM »

Simon, very correct of you about the photos but please share them with whoever may be interested.
I have done my machining but will gladly provide a sketch and the other details of what I have done.
Mike
Mght I suggest you post them in the technical information thread please?
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
Mikenoangelo
Megaposter
*
Posts: 464


« Reply #7 on: 24 June, 2020, 04:26:50 PM »

I'd like to see the Augusta version as well if anyone has a drawing or picture.
Mike
Logged
brian
Megaposter
*
Posts: 289


« Reply #8 on: 24 June, 2020, 08:33:17 PM »

I can try to put on pictures and ink drawings of the Augusta one - works brilliantly. Had a look at S2 Aprilia handbook and that is different as it seems built into crankcase and not a bolt on.
Logged

Brian Hands


1922 Hands Tourer
1934 Augusta standard saloon
1938 Aprilia S1 saloon
1953 Aurelia B10
1965 Flavia Sport
Mikenoangelo
Megaposter
*
Posts: 464


« Reply #9 on: 25 June, 2020, 08:42:57 AM »

Thanks Brian. having just dismantled the rocker gear of the Augusta I found that the rocker shaft had a fair amount of crud inside and that the cams and follower faces on the rockers were quite scored so better oil filtration would be a good plan.

Mike
Logged
Mikenoangelo
Megaposter
*
Posts: 464


« Reply #10 on: 27 June, 2020, 08:05:56 PM »

I can try to put on pictures and ink drawings of the Augusta one - works brilliantly.

Brian  - I found pictures of Dale Hick's version in the Augusta Newsletter and after a chat with him and some drawings I have the info needed to make one. Just have to get a large chunk of aluminium and start metal mowing! Thankyou for your offer.
 
Miike
Logged
brian
Megaposter
*
Posts: 289


« Reply #11 on: 28 June, 2020, 08:46:36 AM »

Good. I had found my old pencil drawings and was thinking how to make the inner oil ways clearer. Now back to the Aprilia.............!
Logged

Brian Hands


1922 Hands Tourer
1934 Augusta standard saloon
1938 Aprilia S1 saloon
1953 Aurelia B10
1965 Flavia Sport
peterblenk
Member
****
Posts: 57


« Reply #12 on: 23 October, 2020, 05:25:06 PM »

Dear Mike,
Have you been able to make surther progress on your Aprilia oil filter? I'd be very interested, as would others, I gather. I have been unable to reach your email. Peter Blenk
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.054 seconds with 20 queries.