Lancia Motor Club Forum Banner
04 June, 2020, 06:05:38 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1] 2 3 4 5   Go Down
  Print  
Author Topic: Fulvia tool kit  (Read 1496 times)
0 Members and 1 Guest are viewing this topic.
TSB GTE
Member
****
Posts: 77


« on: 13 April, 2020, 12:16:50 PM »

Hi Guys,
This is probably something thatís been discussed in the past so apologies if it is, but using up my spare time to look for parts for my cars (2x GTEs) Iíve turned my attention to the vehicle supplied tool kit. Of course as we know with even modern cars itís very annoying to buy a second hand car and find out a previous owner has lost the tool kit or one or two bits from it, but with a 50 yr old car itís very difficult to replace.
Well one of my cars has the original tool kit and because Iím not where the car is I canít say exactly what Iíve got. Also and this is the point of the post, I donít really know what I should have so does anyone know exactly what a series 1 Fulvia tool kit should consist of? Photos would be appreciated.
Stay Safe
Tom
Logged

2x Fulvia GTEs and various other non-Lancias.
Neil
Rebel Poster
*
Posts: 948



« Reply #1 on: 13 April, 2020, 12:24:08 PM »

Hi Tom,  Iíll send you a page from the 1970 parts book that help you solve what may be missing.

Brianís 2c might have a better view of the standard Lancia tool inventory for a GTE.

Neil
« Last Edit: 13 April, 2020, 01:44:31 PM by Neil » Logged

Neil   
386

1973 Fulvia S2 1.3
TSB GTE
Member
****
Posts: 77


« Reply #2 on: 13 April, 2020, 02:58:40 PM »

Thanks Neil,
I think Iím having trouble with PMs as well. Iíll have a better look through that list. Yes Iím hoping Brian will reply and also the blue RHD GT that Chris bought from Portugal and sold to Simon is likely to have a very good tool kit.

Iím trying to attach your information here for others.

Cheers
Tom


* C941E81B-1C23-4F20-BA75-230D563AC401.jpeg (48.45 KB, 480x640 - viewed 206 times.)

* 62180AD1-9592-4033-B22D-66313D79EC89.jpeg (51.64 KB, 480x640 - viewed 212 times.)
Logged

2x Fulvia GTEs and various other non-Lancias.
lancialulu
Press Officer
Permanent resident
*****
Posts: 3835



« Reply #3 on: 13 April, 2020, 04:00:05 PM »

I am sure some of those tools are optional. I personally have never seen 10 15 4
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia 1600HF
1972 1600 Fulvia Sport
1979 2500 Gamma Coupe
1988 Delta 1.6GTi
1998 Zeta
TSB GTE
Member
****
Posts: 77


« Reply #4 on: 13 April, 2020, 04:24:52 PM »

Hi Neil and Tim thanks for that.

Neil do you have a parts list to match the number on the drawing from the parts book?

Iím also almost sure I donít have all those parts even in the car that has the tool box but I need to check when I get home.

I think the jack is supposed to be a Battaini, like this but itís common with Ferrariís so they fetch stupid money.

So as I said Iíve been buying spanners...gone a bit mad with it really but Iíve got a 10x8 (part numbered 2284723)and an 11x9 (part numbered 2186271) and a number of 17 x13 (no stamped number) and Iím now wondering if 17x13 is a Fulvia spanner size at all. Iíve not seen for sale yet a 13x14 or a 17x19.

Iíve pulled some photos off the internet so Iíll try to match up those parts in the diagram to a real thing if I can find a match.
Cheers
Tom
Logged

2x Fulvia GTEs and various other non-Lancias.
lancialulu
Press Officer
Permanent resident
*****
Posts: 3835



« Reply #5 on: 13 April, 2020, 04:41:01 PM »

The spanners 8x10, 9x11, 13x14 and 17x19..... There are no part numbers listed for these in S1 parts book I have but they are 2284723, 2186271, 2186272, 2284722 respectively from my S2 parts book ....
« Last Edit: 13 April, 2020, 04:44:06 PM by lancialulu » Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia 1600HF
1972 1600 Fulvia Sport
1979 2500 Gamma Coupe
1988 Delta 1.6GTi
1998 Zeta
simonandjuliet
Permanent resident
**
Posts: 2124



« Reply #6 on: 13 April, 2020, 05:10:45 PM »

I've only ever seen the tappet tool once in the flesh and would love to find one ....

The 17x19's come up for sale quite often if you follow eBay.
Logged

S1 Aprilia Cabrio, S2 Aprilia, S1 Promiscuo,S2 camioncino, S2 furgoncino, , R4 Sinpar, R4 Rodeo, R60 Tractor,R60 S, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino 73,Fulvia Berlina GT, Fulvia Rallye S,
frankxhv773t
Permanent resident
**
Posts: 1674



« Reply #7 on: 13 April, 2020, 05:13:58 PM »

I wonder if the jack varied between models or between series as the one I have pictured is slightly different. Also did Fulvias have a grease gun as some other models had at about that time?


* LANCIA FULVIA COUPE-NEAR COMPLETE TOOLKIT.jpg (279.94 KB, 1600x1195 - viewed 15 times.)

* Fulvia jack, case and tools.jpg (72.2 KB, 640x480 - viewed 189 times.)
Logged
fay66
Permanent resident
**
Posts: 5819



« Reply #8 on: 13 April, 2020, 05:49:21 PM »

Looked in my 2c handbook, although it lists them slightly different order, they are the same as those shown in the handbook previously.

My jack is the same as shown in Frank's photo and I have never seen the one shown in the illustration, and suspect if it ever was used, it was only used for the Normale.
 
My handbook lists that the
Valve clearance adjusting spanner and feeler gauge, lever for replacing the brake friction pads. We're optional, and that I've never seen.

Never seen any mention of a grease gun as Frank queried might be the case.
 
"Fay" never came with any tools, and most of what I have came courtesy of my good friend Alan Cooper.
I don't have either screwdrivers, pliers, screws for fitting the seat belts, (not surprising).

I also don't know why previous owners of any car feel the need to keep the tools that should stay with the vehicle.

My 1969 Rallye Coupe that i bought from Michael Newberry back about 1997 never had any tools, so it had a scratch set of tools from my tool box.
Brian
8227  Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
1999 Suzuki Wagon R+ GL, now my daughters
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
TSB GTE
Member
****
Posts: 77


« Reply #9 on: 13 April, 2020, 06:30:03 PM »

So hear goes.
1. Tommy bar.
I have a couple of photos showing that. Not pointed which it is in the diagram. See first photo below.

2. Tool box. I have a few photos of this as typical example shown below.


* D2EF3C39-6C50-4AA4-B904-DD3C237BBE79.png (1848.48 KB, 750x1334 - viewed 15 times.)

* 68075D70-340F-474B-AB9E-86BDA4055DF7.png (997.36 KB, 750x1334 - viewed 17 times.)
Logged

2x Fulvia GTEs and various other non-Lancias.
TSB GTE
Member
****
Posts: 77


« Reply #10 on: 13 April, 2020, 06:33:11 PM »

Hi guys, sorry Iím making a meal out of this and you have all sent great information whilst Iím struggling to cope with the limitations of the attachment size.

Iíll carry on

3. Flat bladed screwdriver and 4. Phillips screwdriver
This is I think the most problematic item(s) to identify as original as the quality is not good and they were often missing or replaced. I have same experience of this with my Alfa Romeo 2000GTV.
Iím attaching one photo anyway but other than the fact that the handles look typical itís not possible to say that these are original screwdrivers. I donít think the longer one should be there anyway so it suggests to me that they are not original.


* 4D457099-6F09-47B0-BB9C-9134E9395EF8.png (1890.65 KB, 750x1334 - viewed 15 times.)
Logged

2x Fulvia GTEs and various other non-Lancias.
TSB GTE
Member
****
Posts: 77


« Reply #11 on: 13 April, 2020, 07:15:33 PM »

Carrying blindly on....
5. Not shown very well in the sketch but Iím sure this is the long box spanner or spark plug spanner. See photo attached.
6, 7, 11 & 12 are the open-ended spanners. Consensus now that 6 is 9 x11, 7 is 13x14, 11 is 8x10 and 12 is 17x19... the best photo we have is the one posted by Frank or the attached photo below that Neil sent of his set for his Series 2 coupe.


* 2ED05C3D-A395-48DC-B581-82F5FF567138.png (1799.04 KB, 750x1334 - viewed 14 times.)

* D739B196-6BA2-40D8-8A95-5BC879D029A1.png (1593.88 KB, 750x1334 - viewed 14 times.)
Logged

2x Fulvia GTEs and various other non-Lancias.
TSB GTE
Member
****
Posts: 77


« Reply #12 on: 13 April, 2020, 07:27:38 PM »

And again...
8. Ratchet for the jack and wheel nut (or bolt) socket. Also shown clearly in Frankís great photos and also shown in the photo below. Note that it should be blue and the end lever, presumably for levering off hub caps is original. You see alternatives without that but I think the series 1 cars should be that version. I also think that the ratchet, jack and wheel nut/bolt socket are a set being made by Battaini.
9. Wheel nut/bolt socket as mentioned above and already shown in a few of the photos. I wondered what the disc on the shaft is for. Any thoughts?
Tom


* DF29CFFD-BDC9-426E-BC9F-879C0CE13803.png (1226.57 KB, 750x1334 - viewed 15 times.)
Logged

2x Fulvia GTEs and various other non-Lancias.
TSB GTE
Member
****
Posts: 77


« Reply #13 on: 13 April, 2020, 07:44:30 PM »

10. Tappet pin key. I thought we might all go to our grave never having seen one of these but two minutes on eBay revealed this photo below.
Actually I found more than one size, 12mm or 14mm lock nuts. Yours for only £85 incl P&P from Italy for the man who has everything. Which expert can tell me if the Fulvia tappet lock nuts are 12mm or 14mm?

Cheers

Tom


* 61E1DBB7-B65A-4C76-987F-FCC415835BA2.png (960.38 KB, 750x1334 - viewed 15 times.)
« Last Edit: 13 April, 2020, 07:48:25 PM by TSB GTE » Logged

2x Fulvia GTEs and various other non-Lancias.
lancialulu
Press Officer
Permanent resident
*****
Posts: 3835



« Reply #14 on: 13 April, 2020, 08:16:02 PM »

Unfortunately they are 10mm Angry
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia 1600HF
1972 1600 Fulvia Sport
1979 2500 Gamma Coupe
1988 Delta 1.6GTi
1998 Zeta
Pages: [1] 2 3 4 5   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.041 seconds with 21 queries.