Lancia Motor Club Forum Banner
12 December, 2024, 11:21:37 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Sequence for bleeding brakes  (Read 3791 times)
0 Members and 1 Guest are viewing this topic.
andyps
Megaposter
*
Posts: 331


« on: 03 March, 2020, 09:32:08 PM »

Having fully refurbished the brake system on my S2 with rebuilt calipers, a new master cylinder and a couple of new pipes I need to refill it with fluid. I know with some cars the sequencing for bleeding is critical but the workshop manual doesn't mention anything but thought I would see if anyone recommends anything in particular.
Logged
Scott
Megaposter
*
Posts: 306



« Reply #1 on: 04 March, 2020, 08:22:43 PM »

A good previous thread here: http://www.lancia.myzen.co.uk/forum/index.php?topic=823.0

This reference is useful too: https://viva-lancia.com/fulvia/qanda/brakes/bleeding.php
Logged
andyps
Megaposter
*
Posts: 331


« Reply #2 on: 05 March, 2020, 09:07:07 PM »

Many thanks, I hadn't found either of those threads. I have both an eezibleed and a vacuum bleeder so hopefully will get the system bled properly with one of those and the help of gravity! Along with the correct sequence of course.
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5056



« Reply #3 on: 05 March, 2020, 09:24:15 PM »

I have rigged up something similar to ezibleed on my S2 but kept the pressure low <5psi. Depending on the condition of the reservoir there may be leakage through the spade terminals at the top. But you dont want to blow the reservoir...

I also bleed without but patience is required for the first hour or so as the fluid makes its way through the system. once weeping out of the furthest nipple it is a simple matter with aid of a "peddle pusher".
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
lancialulu
Press Officer
Permanent resident
*****
Posts: 5056



« Reply #4 on: 06 March, 2020, 02:18:03 AM »

Oh and do not try to bleed S2/3 at the back with the rear axle hanging down as fluid will be restricted by the brake compensator at the rear axle.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
andyps
Megaposter
*
Posts: 331


« Reply #5 on: 17 March, 2020, 02:33:57 PM »

Oh and do not try to bleed S2/3 at the back with the rear axle hanging down as fluid will be restricted by the brake compensator at the rear axle.

Thanks, it's on axle stands under the axle cross beam so shouldn't have that issue, except I haven't adjusted the compensator yet.
Logged
nistri
Megaposter
*
Posts: 565


« Reply #6 on: 17 March, 2020, 02:38:14 PM »

Compensator to be adjusted with the wheels on the ground, no spare wheel in the boot, low petrol in the tank. Andrea
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.031 seconds with 21 queries.