Lancia Motor Club Forum Banner
21 January, 2020, 02:36:34 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Fulvia with a bonnet hump  (Read 143 times)
0 Members and 1 Guest are viewing this topic.
DavidLaver
Permanent resident
**
Offline Offline

Posts: 3951



« on: 27 December, 2019, 05:50:15 PM »


1976 1.3.

https://www.classicdriver.com/en/car/lancia/fulvia/1976/721664
Logged

David Laver, Lewisham.
Dilambdaman
Permanent resident
**
Offline Offline

Posts: 1331



« Reply #1 on: 27 December, 2019, 08:05:59 PM »

On the Fanalone Jonathan chamfered the inlet manifold to head to lower the carbs, reduced the height of the temp sender and the throttle linkage to miss the bonnet and reduced the height of the radiator by 20mm so that the rad cap cleared as well. Voila! no bonnet bulge!

Robin.
Logged

Robin Lacey 3222

1932 Dilambda
1969 Fulvia S1 1.6HF Fanalone
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines