Lancia Motor Club Forum Banner
13 November, 2024, 09:41:14 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Sound proofing / deadening recommendations?  (Read 5091 times)
0 Members and 1 Guest are viewing this topic.
DELTONA
Member
****
Posts: 70



« on: 29 October, 2019, 05:13:38 PM »

Hi, with all the various types of sound proofing/deadening material out there its a mine field. Mine has pretty much dissolved and needs replacing therefore I would prefer to go on a recommendation that somebody on here has used on their Fulvia and found it to be good. Any advice much appreciated.
Logged

1993 LANCIA HF integrale | 1969 LANCIA Fulvia Coupe 1.3 Rallye S | 1972 FIAT 695 Elaborazione ABARTH | 1982 FIAT 127 1300GT | 2005 Alfa Romeo 147 GTA | 2010 Alfa Romeo 159ti TBI
lancialulu
Press Officer
Permanent resident
*****
Posts: 5039



« Reply #1 on: 29 October, 2019, 05:35:58 PM »

What!!! Cut out that beautiful sound a Fulvia makes?Huh??
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
fay66
Permanent resident
**
Posts: 6227



« Reply #2 on: 29 October, 2019, 07:38:41 PM »

What!!! Cut out that beautiful sound a Fulvia makes?Huh??

+1
Brian
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
Caracad
Senior Member
*****
Posts: 124



« Reply #3 on: 06 November, 2019, 08:49:46 PM »

Well you can have too much of a good thing.
I like to soundproof my old cars, often because the old stuff is rotten.

It is very difficult to find proper stuff that works. However it can be done.  noise reduction has to be tackled  in three ways.

1. Damping. Material applied directly to metal panels. Floor, bulkhead etc, to damp out the steel itself.
                   For this I use a proprietary self adhesive material like Dynamat. No need to cover the whole       surface, just a piece in the middle of the panel should do.
2. Sound absorption. This reduces airborne noise and is normally felt or foam. OEMs now use very lightweight fleece-like material. Hard to get hold of but good. Failing that closed cell soft foam works.
3. Finally a barrier. This is a heavy layer that blocks noise. Bitumen type material used to be common, but OEMs now use more of a rubber or EPDM Sheet.

All this stuff is available through eBay and should be applied in the order listed. Before you do any of this first check that you bulkhead is sealed. Most old cars have loose or missing grommets. These can be replaced or packed with some sort of sealant, or even Bluetac.
Logged
frankxhv773t
Permanent resident
**
Posts: 2236



« Reply #4 on: 07 November, 2019, 04:35:02 PM »

Dynamat seems to be much used by professional restorers from what I can see.
Logged
nthomas1
Rebel Poster
*
Posts: 855



« Reply #5 on: 07 November, 2019, 05:06:52 PM »

I've been using Noico Black 80mil (2mm) Butyl Mat from Amazon.  Quite a bit less expensive than Dynamat but seems very similar and doesn't have the bold lettering which I (probably irrationally) don't like.  I've applied it to the roof of my car, and plan on using it on the floor and bulkheads.  It will be some time before I can comment on its effectiveness.


* IMG_8088 copy.JPG (926.39 KB, 1559x1169 - viewed 382 times.)
Logged

Norm Thomas
Ormskirk, Lancashire

Own:
1973 Fulvia S2 Coupe
Previous Lancias: S2 Coupe and S3 Coupe in late 1970s
Caracad
Senior Member
*****
Posts: 124



« Reply #6 on: 08 November, 2019, 08:42:21 AM »

Dynamat is expensive. I think I found an alternative, but can’t remember what it is.
Some stuff is just cheap bitumen like stuff that melts when it gets hot.
Proper stuff if more elastic. Here’s mine. Note I didn’t use much as it was only to dampen the panels.



* E0D75417-9315-4D3D-A807-B8A9F524CC2F.jpeg (113.14 KB, 640x480 - viewed 769 times.)
Logged
Caracad
Senior Member
*****
Posts: 124



« Reply #7 on: 08 November, 2019, 08:45:03 AM »

Another pic.


* 6E6D4BE1-B686-4C27-975F-1C97204A57BF.jpeg (105.21 KB, 640x480 - viewed 645 times.)

* 6766E202-E270-4E91-BA5D-DA8401EC36D7.jpeg (99.45 KB, 640x480 - viewed 666 times.)
Logged
frankxhv773t
Permanent resident
**
Posts: 2236



« Reply #8 on: 09 November, 2019, 10:28:27 AM »

That Amazon stuff looks very much like the original sound deadening on more modern Lancias.
Logged
BlueKSO
Member
****
Posts: 56

63 Flavia Coupe


« Reply #9 on: 09 November, 2019, 04:36:26 PM »

Whatever adhesive is used for fixing the sound proofing/deadening to the roof or boot panels, make sure it is heat resistant.  Otherwise, in respect of the roof lining, you’ll be wearing it.  Both roof and boot lid get extremely hot in the summer when the car is parked up.

Cheers,  Peter
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.043 seconds with 21 queries.