Lancia Motor Club Forum Banner
10 December, 2019, 07:54:58 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Starer motor wiring  (Read 324 times)
0 Members and 1 Guest are viewing this topic.
donw
Megaposter
*
Offline Offline

Posts: 477



« on: 22 October, 2019, 12:12:26 PM »

Foolishly I did not take photos or mark the wires when the engine was removed 5+ years ago.  The wiring diagram in the manual is not easy to read.

Has any one a clear diagram or photo please.

6th series.

Don








= years ago
Logged

Don Williamson
Member 111 joined 26th July 1964
1917 Theta 2str
1926 Lambda torpedo
1930 Artena berlina
1933 Belna coupe
Dilambdaman
Permanent resident
**
Offline Offline

Posts: 1325



« Reply #1 on: 23 October, 2019, 10:17:37 AM »

Hi Don,

Is this any help?

https://www.google.com/search?sxsrf=ACYBGNSsRXs3iRuY0Ee-3IGK098Ww8i5PQ:1571825657104&q=Lancia+Lambda+wiring+diagram&tbm=isch&source=univ&client=firefox-b-d&sxsrf=ACYBGNSsRXs3iRuY0Ee-3IGK098Ww8i5PQ:1571825657104&sa=X&ved=2ahUKEwji5MLvkrLlAhWViFwKHaHDBpIQsAR6BAgGEAE&biw=1280&bih=888#imgrc=iDE-5wQ7HQuu5M&imgdii=OI7WVScxWbaRXM

Robin.
Logged

Robin Lacey 3222

1932 Dilambda
1969 Fulvia S1 1.6HF Fanalone
donw
Megaposter
*
Offline Offline

Posts: 477



« Reply #2 on: 23 October, 2019, 06:45:16 PM »

Thanks Robin

My starter is Bosch, its a photo that would be most help.

Hope I can get one at the Pheonix nect Thursday.

Don
Logged

Don Williamson
Member 111 joined 26th July 1964
1917 Theta 2str
1926 Lambda torpedo
1930 Artena berlina
1933 Belna coupe
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1084



« Reply #3 on: 25 October, 2019, 11:53:32 AM »

The Bosch starter has a terminal either side of the power cable from the battery.   One of these activates the starter.  Short across from the power cable to each terminal in turn and you will discover the right one.  My two cars are different!   Then look at the back of the switch unit.    Terminal 50 is the one you need, connect a wire twixt the two and you are done. 


* Lambda wiring.jpg (451.03 KB, 1824x2100 - viewed 24 times.)
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
donw
Megaposter
*
Offline Offline

Posts: 477



« Reply #4 on: 25 October, 2019, 04:42:31 PM »

Thanks David wiring now sorted!  However have now found that the 2 ratchets behind the pinion are knackered the nut holding the pinion on havinf been not fully tight.  Consortium has none in stock at present am advised to get a modern replacement.

Don
n
Logged

Don Williamson
Member 111 joined 26th July 1964
1917 Theta 2str
1926 Lambda torpedo
1930 Artena berlina
1933 Belna coupe
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1084



« Reply #5 on: 28 October, 2019, 05:42:56 PM »

I am also in need of new ratchets.  I think the Consortium should look at getting more made not expecting us to buy modern starter motors.  It cannot be that difficult!
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines