Lancia Motor Club Forum Banner
28 March, 2024, 12:39:31 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Vignale FPM 926C  (Read 3826 times)
0 Members and 1 Guest are viewing this topic.
AndyofYork
Member
**
Posts: 12


« on: 29 September, 2019, 10:02:08 AM »

Good afternoon,

I thought I would post a bit more info. on what I know believe to be Yorkshire's only Vignale!
I am hoping to tease out a bit of FPM's history to spur us on over winter with the aim of getting the car back on the road in late spring.

FPM obviously started life in Sussex, but ended up in Yorkshire in the ‘70s.
At some point it changed from white to red. I wonder when and why that might have been - other than just choice? The car has a blue vinyl interior.

Over many years FPM was on the receiving end of a patchwork quilt of repairs, now rot - that is proving hard to extract - but we will get there.
In Yorkshire the car was run pretty extensively but ended up out of commission in the late '80s. It is currently incorrectly on the DVLA register as a Lancia Beta 1800.

As far as the restoration is concerned,  we are at the tipping point question of just how far do we go with this?
The front end (apart from where we slightly damaged it loading it onto the truck) is OK, the back end is far worse. So we can get to some of the worst bits, cut out and repair, the simplest route would be to take the rear quarters off. Now I know this could be expensive (it already is) but is there anyone making panels for Vignales? Rear quarters would really speed things along.

Thanks for your time and advice in advance and I hope the documents might shed a light on the cars previous life down south when it was new and sparkling. It will be again. Andy


* image1.jpeg (129.94 KB, 640x480 - viewed 618 times.)

* image2.jpeg (134.15 KB, 640x480 - viewed 624 times.)

* image3.jpeg (96.28 KB, 640x480 - viewed 535 times.)

* image4.jpeg (91.51 KB, 640x480 - viewed 537 times.)
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #1 on: 29 September, 2019, 10:35:12 AM »

One for the Vignale register!
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
fay66
Permanent resident
**
Posts: 6189



« Reply #2 on: 29 September, 2019, 09:18:32 PM »

Good afternoon,

I thought I would post a bit more info. on what I know believe to be Yorkshire's only Vignale!
I am hoping to tease out a bit of FPM's history to spur us on over winter with the aim of getting the car back on the road in late spring.

FPM obviously started life in Sussex, but ended up in Yorkshire in the ‘70s.
At some point it changed from white to red. I wonder when and why that might have been - other than just choice? The car has a blue vinyl interior.

Over many years FPM was on the receiving end of a patchwork quilt of repairs, now rot - that is proving hard to extract - but we will get there.
In Yorkshire the car was run pretty extensively but ended up out of commission in the late '80s. It is currently incorrectly on the DVLA register as a Lancia Beta 1800.

As far as the restoration is concerned,  we are at the tipping point question of just how far do we go with this?
The front end (apart from where we slightly damaged it loading it onto the truck) is OK, the back end is far worse. So we can get to some of the worst bits, cut out and repair, the simplest route would be to take the rear quarters off. Now I know this could be expensive (it already is) but is there anyone making panels for Vignales? Rear quarters would really speed things along.

Thanks for your time and advice in advance and I hope the documents might shed a light on the cars previous life down south when it was new and sparkling. It will be again. Andy
Not sure if anyone has panels off the shelf, but I would have thought Bill Lewis or the other person, sorry I can't remember his name, might well be able to make what you require, although he would need to look at a good Vignale panel(another members car) to measure up.
Brian
8227  Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
DavidLaver
Permanent resident
**
Posts: 4365



« Reply #3 on: 30 September, 2019, 07:08:22 PM »


Its worth joining the consortium in addition to the LMC.

http://www.flavia2000consortium.org.uk/home/
Logged

David Laver, Lewisham.
AndyofYork
Member
**
Posts: 12


« Reply #4 on: 01 October, 2019, 02:44:58 PM »

Thanks for replying Brian, I am trying this route via the consortium. I also have some Italian contacts on the search.
I have spent some time in Italy,  and there seem to be first class small fabricators of just about any shaped metal you could ever desire - but try finding someone who makes Lancia body panels!


Not sure if anyone has panels off the shelf, but I would have thought Bill Lewis or the other person, sorry I can't remember his name, might well be able to make what you require, although he would need to look at a good Vignale panel(another members car) to measure up.
Brian
8227  Cool
« Last Edit: 01 October, 2019, 08:32:18 PM by peteracs » Logged
AndyofYork
Member
**
Posts: 12


« Reply #5 on: 01 October, 2019, 02:54:20 PM »


Its worth joining the consortium in addition to the LMC.

http://www.flavia2000consortium.org.uk/home/

Thanks David, I have - and they are on the case.
I am wondering if the complexity of sourcing parts makes this more rewarding.....or not?
I was working with an MGC owner yesterday, and someone said the beauty of this car is we can get any part we want online and delivered tomorrow.
Discuss!
 
Logged
fay66
Permanent resident
**
Posts: 6189



« Reply #6 on: 01 October, 2019, 04:44:26 PM »


Its worth joining the consortium in addition to the LMC.

http://www.flavia2000consortium.org.uk/home/

Thanks David, I have - and they are on the case.
I am wondering if the complexity of sourcing parts makes this more rewarding.....or not?
I was working with an MGC owner yesterday, and someone said the beauty of this car is we can get any part we want online and delivered tomorrow.
Discuss!
 
Yes,  but not half as much fun as when you find the part you've been looking for, in my case a rare piece of trim only fitted to early Fulvia Berlinas, took 17 years Shocked
But to be fair nothing else has taken that long.
Brian
8227  Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
lendickins
Member
**
Posts: 20


« Reply #7 on: 09 October, 2019, 09:49:31 AM »

contact Stef at http://www.proietti.co.uk/ he has a man that can, mention my name, good luck
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.073 seconds with 20 queries.