Lancia Motor Club Forum Banner
28 March, 2024, 04:12:29 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Front Hub  (Read 2325 times)
0 Members and 1 Guest are viewing this topic.
baggybird
Member
**
Posts: 10


« on: 06 May, 2019, 04:49:28 PM »

Has anyone got a exploded view of the front hub assembly?
Have the hub and disc assembled and the half shaft rebuilt but can work out how it all goes together. Found a washer/spacer that fits neatly into the bearing carrier but can’t work out what I’m missing?


* DB32DA68-1F6B-429E-8323-51C7DE8FF1B3.jpeg (1797.17 KB, 4032x3024 - viewed 318 times.)

* AB0E9BA2-88CC-48FB-8D84-1E7358A036A4.jpeg (1788.16 KB, 4032x3024 - viewed 344 times.)
Logged
Dave Gee
Megaposter
*
Posts: 217


« Reply #1 on: 06 May, 2019, 08:37:47 PM »

Hi

The spacer fits on the driveshaft before it  you put it in the hub

Dave
Logged
baggybird
Member
**
Posts: 10


« Reply #2 on: 09 May, 2019, 07:03:51 PM »

Does anything fit on the outside then?
I would never have guessed that it went there, appears to be a sloppy fit up against the CV joint even though there isn't any movement once tightened.
Thought the mating faces would be better.
The manual isn't exactly 'Haynes quality' when attempting these tasks, and the time between removal and re assembly has been far too long
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.057 seconds with 20 queries.