Lancia Motor Club Forum Banner
09 December, 2024, 05:27:09 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Crankcase to Cylinder block oil leak  (Read 6346 times)
0 Members and 1 Guest are viewing this topic.
Bainesy
Lapsed
Member
***
Posts: 33



« on: 29 April, 2019, 09:31:37 PM »

My S3 Fulvia has developed a serious oil leak from the back left corner of the cylinder block to crankcase gasket, there appears to be a heavy seep of oil leaking from here. I believe that I will have to remove the motor to fix this leak, or is a retighten only job.  Oil is everywhere...

Also I found all the bolts loose!  The corner in question were easily turned by finger,  are these coming loose a known problem? 

Thanks Keven
Logged
simonandjuliet
Permanent resident
**
Posts: 2559



« Reply #1 on: 30 April, 2019, 07:06:04 AM »

I suspect that you already know the answer ! I have seen it before where several of the bolts have stripped the threads in the crankcase. They are difficult to get at with a torque wrench so they get over-tightened

I think that the only solution is to remove the engine and then a major strip down and fit helicoils or better still the "time-sert" (I think they're called) system
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia, 2xArdea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20s4,R4 Sinpar, R4 Rodeo, 65 Moke, 3xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole,LR Defender, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan
fay66
Permanent resident
**
Posts: 6233



« Reply #2 on: 30 April, 2019, 07:12:44 AM »

My S3 Fulvia has developed a serious oil leak from the back left corner of the cylinder block to crankcase gasket, there appears to be a heavy seep of oil leaking from here. I believe that I will have to remove the motor to fix this leak, or is a retighten only job.  Oil is everywhere...

Also I found all the bolts loose!  The corner in question were easily turned by finger,  are these coming loose a known problem? 

Thanks Keven
If you look at a sectioned diagram of the engine, forward of the left rear, opposite the oil filter base is where the oil gallery is and where the oil is pumped up to the top of the engine.
This may explain where all the oil is coming from
Brian
8227   Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
chriswgawne
Permanent resident
**
Posts: 2086



« Reply #3 on: 30 April, 2019, 07:43:14 AM »

I had a very similar problem on our GTE under the exhaust manifold side where over time the pressure in oilway had pushed out the heavy duty gasket.
The only solution is to take the engine out, disassemble it and  separate the block from the crankcase and fit a new gasket......AND put a rollpin in the oilway to support the gasket which was a Lancia modification back in the day I understand.
It sounds like a rotten job but actually its is not too bad at all unless you also have to deal with stripped threads.
Has your engine been apart recently do you know?
Chris
Logged

Chris Gawne
Mobile: 07778 216552
Bainesy
Lapsed
Member
***
Posts: 33



« Reply #4 on: 30 April, 2019, 08:29:29 AM »

Thanks all, I probably knew the answer as you say!  No I don't believe the engine has been apart for the last ten years.  Oil pressure is 70 at high revs, compression is (or was) 175, 175, 180 and 170.  she was running sweet and strong up to that moment.
Logged
davidwheeler
Permanent resident
**
Posts: 1485



« Reply #5 on: 30 April, 2019, 09:04:12 AM »

Just hang on!   This happened to me a while after I had rebuilt the engine.  I simply tightened up the bolts in situ and cured it.  Worth a try before you take the engine out.
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
Bainesy
Lapsed
Member
***
Posts: 33



« Reply #6 on: 30 April, 2019, 01:14:47 PM »

Righto David...THANK YOU!
Logged
Neil
Permanent resident
**
Posts: 1316



« Reply #7 on: 30 April, 2019, 01:24:50 PM »

Also check the oil filter housing, mine leaked on the oil pressure sender, worth checking too.
Logged

Neil   
386

1973 Fulvia S2 1.3
stanley sweet
Lapsed
Permanent resident
**
Posts: 1149



WWW
« Reply #8 on: 30 April, 2019, 05:48:41 PM »

I wonder if it was apart sometime in the past and the head never had the second re-torqueing it should have?
Logged

1971 Fulvia 1.3S 'Leggera'  1999 Lancia Lybra 1.9JTD LX SW
Bainesy
Lapsed
Member
***
Posts: 33



« Reply #9 on: 30 April, 2019, 08:10:34 PM »

They were all completely loose.  I think previous owner did indeed forget the re-torque.  I had to grind and reshape a spanner to reach the middle back bolt... bit all done now.  Need a few pipes and rocker gasket before I can retest...watch this space chaps and thanks for the support.  Keven
Logged
simonandjuliet
Permanent resident
**
Posts: 2559



« Reply #10 on: 02 May, 2019, 04:02:42 PM »

Excellent news, just another thought because I was fitting my block today - are the bolts the correct length ? There are 4 different bolts holding down the block (5 on a 1600 engine)

The ones that could easily be confused are in the photo

The longer ones are underneath on the exhaust side


* IMG_2201.jpg (349.74 KB, 960x1280 - viewed 494 times.)
« Last Edit: 02 May, 2019, 04:04:24 PM by simonandjuliet » Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia, 2xArdea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20s4,R4 Sinpar, R4 Rodeo, 65 Moke, 3xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole,LR Defender, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan
Bainesy
Lapsed
Member
***
Posts: 33



« Reply #11 on: 02 May, 2019, 07:31:06 PM »

Thankyou team, great support.  I have re-torqued the bolts and tested the engine across the rev range and it does not leak!  happy days.  Thanks for all the advice.  Keven
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.036 seconds with 21 queries.