Lancia Motor Club Forum Banner
22 November, 2019, 04:48:40 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: S2/3 dash into a S1  (Read 259 times)
0 Members and 1 Guest are viewing this topic.
lancianut666
Permanent resident
**
Offline Offline

Posts: 1037


Slow but rough


« on: 24 April, 2019, 07:34:09 AM »

Hi all
Anyone fitted a S2/3  dash into a S1 car? my car will have a S2 engine and will be able to have a temperature gauge and more legible instruments if a S2 dash could be introduced. It would mean a bit of re-wiring but can anyone see other issues ?
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
will
Member
****
Offline Offline

Posts: 67



« Reply #1 on: 24 April, 2019, 06:35:00 PM »

A problem you may encounter is the second and third series Appias are 60/65 mm wider so a 2/3rd dashboard may not fit in.
The first series instruments just need a good clean if you got the car in bits may be worth sending them off to a specialist to be serviced.
The Appia temperature guage is notoriously inaccurate. If you want a temperature guage may be worth considering  fitting mechanical one with Capilliary pipe which are considered to be very accurate.
Reading the instuments at night can be a problem with an Appia replacing the main battery starter motor lead would help as on my car there was 4 voltage drop on the old cable. 
Logged
DavidLaver
Permanent resident
**
Offline Offline

Posts: 3901



« Reply #2 on: 24 April, 2019, 09:38:00 PM »


Are there any brighter LED bulbs available to help see the instruments?
Logged

David Laver, Lewisham.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines